removal of front bumper pls....
#1
Scooby Regular
Thread Starter
Join Date: Feb 2002
Location: Nobody knows how to tie the simple knots that I know
Posts: 8,010
Likes: 0
Received 0 Likes
on
0 Posts
tis a right pain, we got the wrc lip and mesh done at TSL instead
Oh yes, there's nowhere to fit the mesh to easily on a my00 either
[Edited by scoob_babe - 12/7/2002 6:20:02 PM]
Oh yes, there's nowhere to fit the mesh to easily on a my00 either
[Edited by scoob_babe - 12/7/2002 6:20:02 PM]
#2
Any helpful hints about how to remove the front bumper in order to add mesh would be gratefully accepted.
Basically i need to know if there are any fiddly bits that may arise...thanks.
Basically i need to know if there are any fiddly bits that may arise...thanks.
#4
1. Jack up front of vehicle.
2. Remove plastic wheel liners under the guards. Lots of different plastic clips and a M6 in there as well.
3. Remove grill. 2 or 3 push in clips with a push down tongue. Like the electrical connectors.
4. Unplug foglights. Removal not necessary.
5. Remove blinkers. Top ones have a ball joint.
6. Remove headlights. 4 X M6 bolts.
7. Get under the car there are two plastic screws at each corner of the bar. Remove. Two others near the back of the foglights and another just below the number plate (from memory).
8. Remove plastic screws which were covered by the headlights and front grill.
9. Gently slide front bar off.
Easy....
[Edited by Father Xmas - 11/29/2002 10:58:07 PM]
2. Remove plastic wheel liners under the guards. Lots of different plastic clips and a M6 in there as well.
3. Remove grill. 2 or 3 push in clips with a push down tongue. Like the electrical connectors.
4. Unplug foglights. Removal not necessary.
5. Remove blinkers. Top ones have a ball joint.
6. Remove headlights. 4 X M6 bolts.
7. Get under the car there are two plastic screws at each corner of the bar. Remove. Two others near the back of the foglights and another just below the number plate (from memory).
8. Remove plastic screws which were covered by the headlights and front grill.
9. Gently slide front bar off.
Easy....
[Edited by Father Xmas - 11/29/2002 10:58:07 PM]
#7
thanks peeps, i got a local guy to do it for me...had mesh fitted behind number plate and added an sti vI front splitter....looks kinda tidy...just gotta get the rest coded now...side and rear skirt
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
38
17 July 2016 10:43 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM