TSL front bumper spoiler how does it fit?
#1
Scooby Regular
Thread Starter
Join Date: May 2002
Location: www.ayrshirescoobies.com
Posts: 2,079
Likes: 0
Received 0 Likes
on
0 Posts
asbove, the one fitted to Mattel's car (lester kit or C-west).
How is it fitted, is it bonded on or can you screw it and fit foam sealer round it???
Would prefer one that you don't need to bond on.
Ricey
[Edited by Rice Rocket - 11/9/2002 2:25:30 PM]
How is it fitted, is it bonded on or can you screw it and fit foam sealer round it???
Would prefer one that you don't need to bond on.
Ricey
[Edited by Rice Rocket - 11/9/2002 2:25:30 PM]
#2
Scooby Regular
iTrader: (2)
If it's the one I have, the one that you can put a number plate onto, it fits and almost holds itself on, the fit is so good.
I held mine in place with 4 stainless self-tapping screws, one in each wheel arch, one at either end of the grille area, (lower grille), and 4 stainless cup washers.
I then ran a thin bead of black silicone sealant round it, available from a local carshop. If you're careful, you can make a good job of it.
If I want it off, it'll come, and excess sealant can be removed with "Silicone Eater".
Alcazar
I held mine in place with 4 stainless self-tapping screws, one in each wheel arch, one at either end of the grille area, (lower grille), and 4 stainless cup washers.
I then ran a thin bead of black silicone sealant round it, available from a local carshop. If you're careful, you can make a good job of it.
If I want it off, it'll come, and excess sealant can be removed with "Silicone Eater".
Alcazar
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
ATWRX
Full Cars Breaking For Spares
88
01 February 2016 07:28 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM