When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3d Printed Newage Single DIN Blanking, Gauge/Switch Mount Plates
What is it?
A Newage single DIN blanking plate / adapter for gauges and switches
Options
Two options, either clip mount or screw mounted. Both can be blanking plates, adapters for up to 3 gauges (45mm / 52mm) and/or for mounting switches.
The clip mounted is easily fitted and removed from the front, it does however have a slight lip, and the 52mm gauge unit needs to protude out slightly, see image below. It clips to the grey trim panel and does not require any fixings.
The screw mounted one is flush to the face but requires 2 x course thread 5mm self tapping screws to fix it to the radio bracket. (same screws as used to mount the radio brackets to the dash inner panels).
Arrangements
Up to 3 gauges in each, and I can arrange them as you like, or add holes for switches. Just let me know in a PM
Cost
£15 delivered to the UK and gifted on paypal. PM me if interested!
Cheers for looking.
52mm gauge clip in version
45mm gauge screw in type
45mm gauge clip in type
Last edited by Bazil_SW; 17 November 2018 at 09:53 AM.
14 March 2018, 08:31 PM
3d Printed Newage Single DIN Blanking, Gauge/Switch Mount Plates
