08/09 Hatches, Stand up and show yourselves!!!
Scooby Regular
iTrader: (5)
The roads are rammed down here at the tip of the country ; visitors who stop at the narrowest points, walkers, cyclists, sheer volume. It's just not sensible to drive fast. But yesterday evening I discovered a solution ; go out whilst Poldark is on!
Empty, driving with the setting sun on the road from St Ives to Lands End, cliffs, moorland tors, ruined mines. The Spec C in its element, I was reminded what a fantastic car it is on winding roads. Outrageous.
Empty, driving with the setting sun on the road from St Ives to Lands End, cliffs, moorland tors, ruined mines. The Spec C in its element, I was reminded what a fantastic car it is on winding roads. Outrageous.
Scooby Regular
iTrader: (78)
Not sure where I ended up at the end as they haven't published Sunday online yet, but I do recall a 47 something.
But I have to say a big thanks to Brian Coward at Cams Performance near Blackburn for pulling out all the stops to get the car ready considering the engine was out of the car 2 days prior - absolute legend.
Car was around 400-450 I think, 1.5 bar, no LC, no ALS, extreme poor weather on 265 wide tyres! Making excuses I know, but we were all in the same boat!
But I have to say a big thanks to Brian Coward at Cams Performance near Blackburn for pulling out all the stops to get the car ready considering the engine was out of the car 2 days prior - absolute legend.
Car was around 400-450 I think, 1.5 bar, no LC, no ALS, extreme poor weather on 265 wide tyres! Making excuses I know, but we were all in the same boat!
Scooby Regular
iTrader: (25)
Scooby Regular
iTrader: (78)
The intake hose was the Achilles heel on the saloon, I don't know if this was upgraded on the hatch. I'm running a 76mm inlet I think. Sorry no pictures, but it was a bloody squeeze.
https://youtu.be/r1aDQG6451o
https://youtu.be/r1aDQG6451o
Scooby Regular
iTrader: (6)
still to fit it though....
Scooby Regular
iTrader: (7)
Scooby Regular
iTrader: (25)
i bought the viperperformance one yesterday but have to sent it back as my new turbo is 60mm and hose was 55mm
Scooby Regular
filming for a car program with this chap today ,, good clean fun
Scooby Regular
iTrader: (5)
Scooby Regular
Scooby Regular
I’ve got one at home to fit but it was such a tight squeeze! So I’m waiting for a day to remove the inlet manifold to get it in that way.
Scooby Regular
Scooby Regular
yes mate ,, needed it for a better comparison to the evolution FQ400 that was there aswell,, its in the background behind mine ,, was a really good laugh lol ,, ended up burning my clutch up trying to work out how to do donuts in these bloody cars ,, to much technology getting in my way and couldn't work out how to switch it off properly lol
Last edited by domino46; 10 August 2018 at 07:14 AM.
Scooby Regular
Scooby Regular
iTrader: (6)
First impressions - its running very smoothly now, i didn't have that much of a stumble to begin with but could still feel a little on partial throttle - now i dont have that.
Yep full assembly removed (on page 3) as per their fitting instructions
https://www.perrin.com/images/products/PSP-FUL-301.pdf
Scooby Regular
iTrader: (1)
First impressions - its running very smoothly now, i didn't have that much of a stumble to begin with but could still feel a little on partial throttle - now i dont have that.
Yep full assembly removed (on page 3) as per their fitting instructions
https://www.perrin.com/images/products/PSP-FUL-301.pdf
Yep full assembly removed (on page 3) as per their fitting instructions
https://www.perrin.com/images/products/PSP-FUL-301.pdf
did it not not require a tune afterward ?
Scooby Regular
iTrader: (6)
Scooby Regular
iTrader: (6)