perko7

ive fitted the alarm fine but need help with the wiring to the slave motor , motor is in place but cant figure out how to wire it up as data sheet has six ways to do it any help would be great........... thanx in advance

perko7

anyone ?

steve nic

ask ian aka MR TOAD INSTALLER

steve nic

https://www.scoobynet.com/member.php?u=58939

P600wrx

iTrader: (1)

Use the part for adding actuator mate,

Blue/yellow and grey/yellow to ground
Red/black red/yellow to 12volts
Blue/red to motor unlock
Grey/red to lock

If the motor your fitting has just 2 wires 1 is green 1 is blue, then wire it up and test u can't get it wrong really all it wil do is work backwards so swap the 2 wires round till it locks on arm and unlocks on disarm,

Hope this helps mate

perko7

not sure if i tried this way and didnt work ? will give it another try in the morning , if it dont work this way any other ideas as the rest seems fine ?

P600wrx

iTrader: (1)

It should work that way, as the motor is a reverse polarity motor, the wiring I said will work for reverse polarity, if u get stuck I'm just up the road in wolves mate,I have 20 years fitting alarms and 10 of them on classic imprezas

perko7

cheers i will hold you to that lol will try in morning and have to let you know . you dont know daz at central by any chance do ya ?

perko7

working good ! god knows what id done as i had the wires like that in the first place lol, do you know what the default setting are as its not chirping on arm/disarm ? by reading online i found its set to off ...........wanted it on and the siren loud ! lol

P600wrx

iTrader: (1)

Yes I know daz well mate, as for the settings, it is default off will only chirp if u left a door open orbit has been triggered, but u can set it to audible arm/disarm,

http://www.fto-group.co.uk/pdf/toadai606.pdf

That's the full wiring and instructions and further down u will see programming guide siren volume is 2-4 just follow it and u will be sorted, but u can't make the siren any louder than 120db

perko7

yeah i got them instructions , just cant get into the menu , i can do the code no probs the second part aint as easy lol

perko7

YES !!!!!!!! sorted it thanx for your help p600wrx ;-)

P600wrx

iTrader: (1)

No worries