toad ai6o6 on classic impreza
 

ive fitted the alarm fine but need help with the wiring to the slave motor , motor is in place but cant figure out how to wire it up as data sheet has six ways to do it :confused: any help would be great........... thanx in advance

anyone ?

ask ian aka MR TOAD INSTALLER

Use the part for adding actuator mate,

Blue/yellow and grey/yellow to ground
Red/black red/yellow to 12volts
Blue/red to motor unlock
Grey/red to lock

If the motor your fitting has just 2 wires 1 is green 1 is blue, then wire it up and test u can't get it wrong really all it wil do is work backwards so swap the 2 wires round till it locks on arm and unlocks on disarm,

Hope this helps mate

not sure if i tried this way and didnt work ? will give it another try in the morning , if it dont work this way any other ideas as the rest seems fine ?

It should work that way, as the motor is a reverse polarity motor, the wiring I said will work for reverse polarity, if u get stuck I'm just up the road in wolves mate,I have 20 years fitting alarms and 10 of them on classic imprezas

cheers i will hold you to that lol will try in morning and have to let you know . you dont know daz at central by any chance do ya ?

working good ! god knows what id done as i had the wires like that in the first place lol, do you know what the default setting are as its not chirping on arm/disarm ? by reading online i found its set to off ...........wanted it on and the siren loud ! lol

Yes I know daz well mate, as for the settings, it is default off will only chirp if u left a door open orbit has been triggered, but u can set it to audible arm/disarm,

http://www.fto-group.co.uk/pdf/toadai606.pdf

That's the full wiring and instructions and further down u will see programming guide siren volume is 2-4 just follow it and u will be sorted, but u can't make the siren any louder than 120db

yeah i got them instructions , just cant get into the menu , i can do the code no probs the second part aint as easy lol

YES !!!!!!!! sorted it thanx for your help p600wrx ;-)

No worries