djski

Hi,

Round a friends house the other night and his door got kicked in by 3 hooded scumbags. They got my keys and wallet. Failed to get the car though!

But they now know were I live and have my keys.

Have deleted the key from the cars memory but they still have the alarm remote.

Can anyone tell me how to remove the stolen remote from the alarms memory?

Thanks.

pum

Ok here ya go..

with keys in and turned on with ignition light's enter your valet code with the plain veiw button

then press and hold (*) the marked side of the button and you will hear a beeb.

then press(*) marked button 6 times you will 6 beebs then press the blank side of the button 2times you will then hear 2 beebs to confirm all remote's have been cleared..

NOW TO PROGRAM THE REMOTE YOU HAVE

now turn on the ignition again and enter your valet code,
press and hold (*) marked side of the button again you will hear 1 beeb,
press* followed by 1 beeb thenpress the blank side 1 time and you will hear 1 beeb then with the remote you still have press lock/unlock button 1 you will hear 1 beeb the press the same button again and you will hear 2 beebs.
turn off ignition and your done.

hope you get the ****'s
pum

djski

Thanks for your help but I don't have a (*) button on my remote. Just 4 plain buttons on top and one on the side, no markings on them.

Which is the (*) button?

Thanks.

Sticky Stuff

I think he means the star button on the plainview switch...

Mark@Clifford/Directed

The above instructions refer to a G4 product, the correct procedure is as follows;

The system doesn't have an "erase all feature" so you will need to code your existing remote in 4 times to push the old code out of the non volatile memory.

Program a remote....

Turn ignition on and enter your code through the valet switch.
Then immediatley start pressing the momentry side of the swich 10 times, the siren will not chirp the first three presses but will the last 7 so count the presses not the chirps. then transmit button 1(big one at top) siren will chirp to confirm it has received. Repeat this another 3 times to push the old remote out.

Hope this helps