KENWOOD 25TH ANNIVERSARY SOUND SYSTEM FOR SALE
27 February 2009, 06:22 PM
#1
Scooby Regular
Thread Starter
Join Date: Jan 2009
Location: edinburgh
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
KENWOOD 25TH ANNIVERSARY SOUND SYSTEM FOR SALE
Orite troops i have my or part of my old system for sale it consists of 1 un-carpeted 10" 1000watt sub (had 3 but cut one off) 2 kenwood crossovers (part off the 25 anniversary series) and 1 4channel digital amp also part of same series and also a stinger power pack i may also throw in my capacitor aswell but undecided the now for the above mentioned looking for about £130 and with the cap £150
contact me on either roverlution@hotmail.co.uk or pm me
pics can be sent on request same as any other info needed
AMP SPEC
Normal
RMS Watts per channel @ 2 ohms < 1 % THD+N 124 W × 4
contact me on either roverlution@hotmail.co.uk or pm me
pics can be sent on request same as any other info needed
AMP SPEC
Audio Section
Max Power Output 960 W
Rated Power Output (+B = 12.0 V)
Normal (4 Ω) (20 Hz –20 kHz, 0.05 % THD) 45 W × 4
Max Power Output 960 W
Rated Power Output (+B = 12.0 V)
Normal (4 Ω) (20 Hz –20 kHz, 0.05 % THD) 45 W × 4
Normal
(2 Ω) (1 kHz, 0.5 % THD) 90 W × 4
Bridged (4 Ω) (1 kHz, 0.5 % THD) 180 W × 2
Rated Power Output (+B = 14.4 V)
Normal (4 Ω) (20 Hz –20 kHz, 0.05 % THD) 60 W × 4
Normal (4 Ω) (20 Hz –20 kHz, 0.05 % THD) 60 W × 4
Normal
(4 Ω) (DIN : 45324 , +B = 14.4V) 60 W × 4
Normal
Normal
(2 Ω) (1 kHz, 0.5 % THD) 120 W × 4
Bridged (4 Ω) (1 kHz, 0.5 % THD) 240 W × 2
Low Pass Filter Frequency (24 dB/oct.) (B channel) 50 –200 Hz (variable)
High Pass Filter Frequency (12 dB/oct.) 50 –200 Hz (variable)
Infrasonic Filter Frequency (24 dB/oct.) (B channel) 15 Hz
Frequency Response (+0, – dB) 5 Hz –50 kHz
Signal to Noise Ratio 105 dB
Sensitivity (rated output) (MAX.) 0.2 V
High Pass Filter Frequency (12 dB/oct.) 50 –200 Hz (variable)
Infrasonic Filter Frequency (24 dB/oct.) (B channel) 15 Hz
Frequency Response (+0, – dB) 5 Hz –50 kHz
Signal to Noise Ratio 105 dB
Sensitivity (rated output) (MAX.) 0.2 V
Sensitivity (rated output)
(MIN.) 5.0 V
Input Impedance 10 kΩ
Amplifier Control Section (EQ) (B channel)
Bass frequency 60 / 80 / 100 / 200 Hz
Bass level -15 — +15 dB
Bass Q factor 1.00 / 1.25 / 1.50 / 2.00
Treble frequency 10 / 12 / 15 / 17 kHz
Treble level -15 — +15 dB
General
Operating Voltage 14.4 V (11 – 16 V allowable)
Current Consumption 42 A
Dimensions (W × H × D) 446 × 61 × 259.5 mm
Bass frequency 60 / 80 / 100 / 200 Hz
Bass level -15 — +15 dB
Bass Q factor 1.00 / 1.25 / 1.50 / 2.00
Treble frequency 10 / 12 / 15 / 17 kHz
Treble level -15 — +15 dB
General
Operating Voltage 14.4 V (11 – 16 V allowable)
Current Consumption 42 A
Dimensions (W × H × D) 446 × 61 × 259.5 mm
17-5/8 × 2-3/8 × 10-3/16 inch
Installation Size (W × H × D) 446 × 61 × 265 mm
17-5/8 × 2-3/8 × 10-3/8 inch
Weight 4.47 kg (9.85 lbs)
CEA-2006
RMS Watts per channel @ 4 ohms < 1 % THD+N 88 W × 4
RMS Watts per channel @ 4 ohms < 1 % THD+N 88 W × 4
RMS Watts per channel @ 2 ohms < 1 % THD+N 124 W × 4
Last edited by SC008Y2009; 27 February 2009 at 06:27 PM.
27 February 2009, 09:13 PM
#2
Scooby Regular
Thread Starter
Join Date: Jan 2009
Location: edinburgh
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
FOR ALL YOUS THAT ASKED HERES THE PART NUMBERS
XXV-04S
XXV-03A
XXV-02A
kfcxw1202dvc
CHECK THEM OOT GOOGLE IT WELL OVER £300 WORTH OF GEAR AND WORTH EVERY PENNY
XXV-04S
XXV-03A
XXV-02A
kfcxw1202dvc
CHECK THEM OOT GOOGLE IT WELL OVER £300 WORTH OF GEAR AND WORTH EVERY PENNY
Thread
Thread Starter
Forum
Replies
Last Post
