Quarter mile advice please!!
09 May 2003, 03:32 PM
#1
Scooby Regular
Thread Starter
Join Date: Apr 2003
Location: Glasgow
Posts: 597
Likes: 0
Received 0 Likes
on
0 Posts
I am currently running a Uk MY99 with a full decatted scorpion system and a K+N panel filter with a Forge VTA dump valve.I have ran it once with this set up at Crail but was unimpressed with my 14.4 sec best run.What is my next move for a better time?
09 May 2003, 03:37 PM
#2
Scooby Regular
More power should do the trick!! 
Other than that, just try to perfect your launch, I have heard that if you get between 3500-4000rpm and then launch it off the line like that it is better than screaming away @ 6000rpm then dumping the clutch unless you fancy buying a new clutch in the near future...
I'm sure you will get some better advice from some of the guys here!!
Cheers,
Grant
Other than that, just try to perfect your launch, I have heard that if you get between 3500-4000rpm and then launch it off the line like that it is better than screaming away @ 6000rpm then dumping the clutch unless you fancy buying a new clutch in the near future...
I'm sure you will get some better advice from some of the guys here!!
Cheers,
Grant
09 May 2003, 03:42 PM
#3
Scooby Regular
Join Date: May 2002
Posts: 586
Likes: 0
Received 0 Likes
on
0 Posts
More Boost is the short answer. I was running high 13's running 1.0 bar of boost with a knackered clutch in a RA. Speak to Andy F and the like on this forum and they will give you your options from here.....
Good Luck.
The other answer is to buy a Skyline
Good Luck.
The other answer is to buy a Skyline
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM
speedrick
Subaru Parts
0
26 September 2015 03:01 PM