Which top mount intercooler is best for a version 3?
#1
Which top mount intercooler is best for a version 3?
Hi,
I've just picked up a tidy version 3 WRX and I don't want to chop the car about to fit a front mount and I know that newage intercoolers fit later classics but this is my first version 3
Do newage sti intercoolers fit version 3 & 4's or do they only fit version 5 & 6?
Sorry for the dumb question.
Thanks,
Paul
I've just picked up a tidy version 3 WRX and I don't want to chop the car about to fit a front mount and I know that newage intercoolers fit later classics but this is my first version 3
Do newage sti intercoolers fit version 3 & 4's or do they only fit version 5 & 6?
Sorry for the dumb question.
Thanks,
Paul
#2
Scooby Senior
iTrader: (68)
They do Paul but you have some messing about with the d/v, as the later intercoolers have the dv bolted directly to the cooler. This means it catches on the Idle control valve, so needs an adaptor plate with a little pipe coming off it
Some pics here
https://www.scoobynet.com/scoobynet-...o-classic.html
Some pics here
https://www.scoobynet.com/scoobynet-...o-classic.html
Last edited by banny sti; 23 October 2013 at 02:59 PM.
#6
Scooby Senior
iTrader: (68)
Think it would still foul, though the intercooler is smaller.
You could try this...
http://www.carldavey.co.uk/article.php?id=3
You could try this...
http://www.carldavey.co.uk/article.php?id=3
Last edited by banny sti; 24 October 2013 at 07:50 AM.
Trending Topics
#12
Scooby Regular
iTrader: (6)
Join Date: Nov 2004
Location: Deepest Darkest Kernow
Posts: 4,404
Likes: 0
Received 1 Like
on
1 Post
I'm using a newage STI intercooler on my V4. It has been modded though for the original V4 dump valve. I think originally Zen did the work. You do need to cut down the brake reservoir by the bulkhead though.
Thread
Thread Starter
Forum
Replies
Last Post
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM