Ryan-STi

Mods are -

- 3" Nur Spec R BackBox & Centre Pipe
- Japspeed Decat
- HRC290 Fuel Pump
- K&N Panel Filter
- Forge Atmos DV
- BC Coilovers
- HEL Braided Brake Hoses
- Standard V9 Wheels with Yokohama A048 Semi Slicks

I've got a EcuTek ReMap booked in for Tuesday hoping for 300-320+

I've also changed..

- Brake Fluid To RBF600 Dot4
- Engine Oil
- Diff Oil
- New Discs & Pads all around

Is there anything else I should be needing, heard things about an oil cooler? Worth it?

Any tips would be greatly apriciated!

Thanks guys. Ryan

tubbytommy

iTrader: (20)

id check out the noise limit on the track your going to as it may not pass due to your nur spec

you should get way more than 320 with those mods too.

zayd

iTrader: (1)

Mate with all those mods, you should be getting around 330!

Ryan-STi

I've got a bung in the exhaust, the noise limit is 105db, so fingers crossed should pass that.

Well I was hoping for more... 330-350ish but Bob Rawle told me 300-320

tubbytommy

iTrader: (20)

wont the bung strangle the power though.

jura11

iTrader: (7)

As above there you should be making more than 300-320bhp and about the track days,with Nur Spec on track I would say you will struggle,you will need quieter exhaust for track

Oil cooler you don't need for now,in later stages you will see,just monitor temperatures and you will see

About the brake pads,speak with Alyn@AS Performance,I would suggest Performance Friction pads



Jura

Ryan-STi

I'm not too sure about the bung, but I've got a sound monitor in work so I will check.

I've ready for the performance friction pads buddy

Any guesses on power then?

jura11

iTrader: (7)

For bung you will need to have this mapped as bung will restrict flow,your mapped can make two boost map on yours and one will be for bung and one without

Power guess,I would say 330-340bhp is possible and depends on mapper and how far he wants the push yours car

Jura

Ryan-STi

It's getting mapped by Bob Rawle. Ill ask him to do two maps then for the bung. Gunna test the noise with and without tomorrow!

nyone know if there is anything I would need/replace/uprate for track use?

BoozyDave

iTrader: (8)

i've driven mine with a bung in and it feels slower than std!

get a different exhaust for the track, it will still be free flowing, not restricted like with a bung