F1 CJE UK

iTrader: (8)

Hi All,

Quick question. I am mid way through fitting a Carbon firewall and to clean the area up I have moved the cables from the top of the parcel shelf and moved them under the metal inside the boot area.

Now one of the cables is easy to deal (power to boot light) simply cut the cable and extended it easy! The other cable goes into the rear window on either side and I guess its part of the heated window and aerial? Anyhow I really need to extend this cable to make my master plan work.

The cable seems a little thicker than a normal cable and has AUS-2 written on it (already goggled it with no results) it then goes into the Clarion box that say 12v grounded on it. Any ideas of type of cable I need?

Thanks for any help you can offer

Chris

wiggy1

iTrader: (7)

Is clarion not audio of some description?

F1 CJE UK

iTrader: (8)

Yes think it is, I guess its the aerial but not sue if I can cut it and use normal 12v cable to extend it?

wiggy1

iTrader: (7)

No wont be able to use normal cable won't work properly

tubbytommy

iTrader: (20)

The clarion part is the aerial amplifier.
Im pretty sure the cable is thicker due to the extra power the rear screen uses

F1 CJE UK

iTrader: (8)

anyone have an idea what cable this will need?

F1 CJE UK

iTrader: (8)

Just PM scott at scoobyspares see if he has one of these cables, plan is to cut the cable and extend it with the same style of cable. Would that work?


Thanks all for the rapid reply!

tubbytommy

iTrader: (20)

i would think its just thicker cable than the rest, probably 2mm as opposed to 1mm everywhere else.

albob

aerial wire is usually co-axial (a centre core for the signal and an outer shield)

JdcTypeR

iTrader: (19)

If it is a co-axial cable can you not use a joiner to extend it?

F1 CJE UK

iTrader: (8)

Ok thanks guys, where should I go to try and get the same type of cable? A car audio place?

albob

yep - or Maplins

F1 CJE UK

iTrader: (8)

Nice one, didn't think of maplins!