When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Evening all, after some advise, currently collecting parts for tuning my 03 wrx blobeye. Need to get some uprated injectors, questions are
1- do I need top feed or side feed
2- where do I go for them?
3- what size should I go for?
Mods that will be fitted listed below
2.5 inch decat up
Bell mouth 3 inch down and 3 inch system
Vf43 turbo
Sti top mount
Hks hybrid panel filter
Walbro 255 fuel pump.
Eerr think there is some more but my mind has gone blank...
Looking to get 350bhp +
If there is anything else you may advise please feel free as this is my first car I'm tuning and going by word of mouth...
Thank you
somebody on here is selling some injectors that have been flow matched etc for around £150 which is a good price, watch out for your gearbox at that power matey
if your gearbox is a 5 speed then 400+ bhp will destroy it matey,i have the same car as you with an sti engine and i was gonna go for 400 bhp but my gearbox is holding me back,im gonna settle for around 340 ish until i decide what to do about my box
if your gearbox is a 5 speed then 400+ bhp will destroy it matey,i have the same car as you with an sti engine and i was gonna go for 400 bhp but my gearbox is holding me back,im gonna settle for around 340 ish until i decide what to do about my box
Yeah as above mate. I'm only going for 350ish, haven't got a max target but minimum target is 350. Think I will be happy with that. Box should be ok on that surely?
Yeah as above mate. I'm only going for 350ish, haven't got a max target but minimum target is 350. Think I will be happy with that. Box should be ok on that surely?
it will be on its limit matey its the torque that will kill it,if you dont launch it then you might be ok,i never launch mine
If you are at Essex speak to Neil@Slowboy racing he is located just outside Brands hatch about the mapping and if you are need to fit parts as well speak to him too