how to change oil
#2
it is dead easy to chande the oil you first remove the plastic shield underneath which is held in place by four 12mm bolts two self tapping screws and two plastic clips at the back. then you will be able to see the sump plug (17mm) and the oil filter. if you buy a 5 litres of your choice of oil this will be enough to refill the engine with a bit left over for topping up.
[This message has been edited by scoobyboy (edited 18 April 2001).]
[This message has been edited by scoobyboy (edited 18 April 2001).]
#3
it is dead easy to chande the oil you first remove the plastic shield underneath which is held in place by four 12mm bolts and two self tapping screws then you will be able to see the sump plug (17mm) and the oil filter. if you buy a 5 litres of your choice of oil this will be enough to refill the engine with a bit left over for topping up.
#4
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:<HR>Originally posted by subevo:
<B>due to being a miser, how easy is it to change engine oil and how many litres do i need. my99 uk turbo.any special tools required.[/quote]
subevo.
Word of caution. Make sure you have a large oil drain container. The oil comes out of the engine bloody fast!!! Last time I tried it half of it ended up all over the driveway, cos I used a cheapo oil drain can.
<B>due to being a miser, how easy is it to change engine oil and how many litres do i need. my99 uk turbo.any special tools required.[/quote]
subevo.
Word of caution. Make sure you have a large oil drain container. The oil comes out of the engine bloody fast!!! Last time I tried it half of it ended up all over the driveway, cos I used a cheapo oil drain can.
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM