turbo supercharger
#5
Scooby Regular
Thread Starter
Join Date: Jul 2012
Location: uk
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Bog standard.
Bought it on Saturday from a dealer 250mile away.
Buts got 1 month warranty swell
Everything was fine until I had the recirc off last night.
Would the pipe that goes under the recirc if it was not mega tight would that cause the whine.
Just worried about it you know.
Bought it on Saturday from a dealer 250mile away.
Buts got 1 month warranty swell
Everything was fine until I had the recirc off last night.
Would the pipe that goes under the recirc if it was not mega tight would that cause the whine.
Just worried about it you know.
Last edited by Hatchytoku; 17 July 2012 at 09:53 AM.
#6
Scooby Regular
iTrader: (11)
Join Date: Oct 2010
Location: Herefordshire
Posts: 2,760
Likes: 0
Received 0 Likes
on
0 Posts
If it didn't do it before you had the recirc valve off but does now you need to recheck all pipework around there in case you've disturbed anything and tighten up and reseat anything that's loose.
Why did you take off the recirc valve?
Why did you take off the recirc valve?
#7
Scooby Regular
iTrader: (78)
Sounds like it needs to go back!
Can you upload a video clip and post it on here?
Does the noise appear on blipping the throttle under no laden/boost?
A supercharger noise is apparant all the time, as it's associated with belt driven/pulleys so if that's the case with yours and you have no loss of power it may just be that the fan belt or alternator is whining( hopefully)
Can you upload a video clip and post it on here?
Does the noise appear on blipping the throttle under no laden/boost?
A supercharger noise is apparant all the time, as it's associated with belt driven/pulleys so if that's the case with yours and you have no loss of power it may just be that the fan belt or alternator is whining( hopefully)
Trending Topics
#8
Scooby Regular
Thread Starter
Join Date: Jul 2012
Location: uk
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Only does it under load.
Was going to fit a BOV but decided against it.
Its defiantly notna belt.
Will record it at lunch. Car doesn't really feel done on power.
Was going to fit a BOV but decided against it.
Its defiantly notna belt.
Will record it at lunch. Car doesn't really feel done on power.
#10
Scooby Regular
iTrader: (78)
Just realised you revised your post I read so ignore what I said about belts etc, the recirculating is as good as it gets for the job in hand, don't bother with a Chav valve
Sounds like the hose isn't attached properly. It a bugger to get on the underside with the OEM jubilee. Make sure it's secure and that you have pulled it off the turbo intake, this would account for the sound. If the little vac pipe had come off it would hiss on idle, and chatter through gears(compressor stall)
Revised the above.... had a bad typo moment (iPad) LOL
Rob
Sounds like the hose isn't attached properly. It a bugger to get on the underside with the OEM jubilee. Make sure it's secure and that you have pulled it off the turbo intake, this would account for the sound. If the little vac pipe had come off it would hiss on idle, and chatter through gears(compressor stall)
Revised the above.... had a bad typo moment (iPad) LOL
Rob
Last edited by Rob Day; 17 July 2012 at 04:23 PM.
Thread
Thread Starter
Forum
Replies
Last Post