I need about 1m of vacuum hose 3mm from inlet manifold to FPR thus has Tia be able to handle high pressure without collapsing .

My problem is I can only find silicon hose with a 1.5mm thickness wall and this didn't seem appropriate for the application , has anyone got any recommendations or links to such sites that sell the right stuff please.

 

I would have thought the stuff you've found would be more that up to the job, Lee.

 

On closer inspection the stuff I have installed is 3mm silicone vac pipe but can squash it between my thumb and forefinger , the FPR will vary fuel pressure depending on boost pressure so I don't want the pipe to collapse giving a false reading to FPR as this could a drop in fuel pressure and be quite critical

 

Has anyone got any pics of vac line to FPR

 

viperperformance do good pipe Lee,I had all mine from there including my FPR pipe

 

Best I have mate;



Can measure the O/D tomorrow if you want, not sure on the I/D.

 

Lot more pressure in between your finger and thumb, than a car will pull under vacuum, IMO.

 

That's great Micky thanks your line looks exactly the same as the one I have , question I too have a fuelab and need a gauge wheres the best place too get one from and price

 

Gauge came with the Fuelab reg, mine was from Lateral Performance, but, I didn't pay for it.

Alyn @ AS Performance is a Fuelab dealer, give him a ring; 0191 410 3770 or try Mark @ Lateral.

 

Cheers mate

 

Did you take the vacuum line from FPR back to the inlet manifold ?

 

Mine goes back to where the OEM reg vac pipe connects, Lee.

 

Can't remember where that was I've taken mine back to spout ontop of inlet manifold

I was in touch with Alan @AS Performance today and gauge now sorted thanks for the heads up