When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
It's pretty simple buddy If the nuts come off ok. Spray plenty of WD40 the night before is a must.
You can get to 3 of the nuts from the top but the other two need to be done from underneath.
It's pretty simple buddy If the nuts come off ok. Spray plenty of WD40 the night before is a must.
You can get to 3 of the nuts from the top but the other two need to be done from underneath.
Probably the best way, but after removing the heat shield I managed to get to all 5 from above. Matts way is easier, but I was being stubborn. Sometimes they crack easy, sometimes a grinder is required
I used a long hollow bar over the top of a spanner to crack the top nuts and luckily the two underneath came free quite easily.
Bit of heat can help too but plenty of WD40 should do the trick.
15 May 2012, 10:02 PM
In need of info n pics
