massive thanks to alan jeffreys @ enginetuner
11 April 2012, 01:11 PM
#1
massive thanks to alan jeffreys @ enginetuner
couldnt have asked for anymore, car been off road pretty much since the tunnel run back last october. had a total of 3 people/garages who pretty much didnt finish the job.
picked up the car from enginetuner yesterday, and i could honestly say 'they're the best out there'
service in general is amazing with alan and the guys there, almost an instant response at times.
the drive home felt as smooth as when i first had the car, back to its best!!
on the new engine (2.1 CDB), theyve even set a limiter to stop me from revving over 4k. and give me the full instructions on how to run the new engine in
already done 400 miles, another 200 miles and i'll be heading back up to plymouth for my re-map.
i would definitely recommend enginetuner to anyone who would like to re-build or pretty much anything or their motor
see you 'enginetuner' soon!!!
wiley
picked up the car from enginetuner yesterday, and i could honestly say 'they're the best out there'
service in general is amazing with alan and the guys there, almost an instant response at times.
the drive home felt as smooth as when i first had the car, back to its best!!
on the new engine (2.1 CDB), theyve even set a limiter to stop me from revving over 4k. and give me the full instructions on how to run the new engine in
already done 400 miles, another 200 miles and i'll be heading back up to plymouth for my re-map.
i would definitely recommend enginetuner to anyone who would like to re-build or pretty much anything or their motor
see you 'enginetuner' soon!!!
wiley
11 April 2012, 05:45 PM
#7
cant go wrong with enginetuner,very nice people,genuine proffesionals!
just been down there for mapping,and will be going down there again soon.
excellent as always!
just been down there for mapping,and will be going down there again soon.
excellent as always!
Trending Topics
11 April 2012, 05:45 PM
#8
11 April 2012, 05:49 PM
#10
11 April 2012, 06:03 PM
#11
Scooby Regular
iTrader: (5)
Join Date: Aug 2003
Location: Mitsubishi Lancer Evolution 8 RS
Posts: 6,517
Likes: 0
Received 1 Like
on
1 Post
ET built my last engine an will be building my next! The amount of cars/engines they have at any 1 time in their workshop will vouch for their competantcy and popularity! If you have an issue then speak to Alan and no doubt he will bend over backwards to help you if you've followed their guidance to the letter!
Judging by your username your of Ford background so not one for reliable motors
Judging by your username your of Ford background so not one for reliable motors
11 April 2012, 06:54 PM
#12
I have never actually had any dealings with engine tuner as yet but alot of my friends have had their engines built with them and mapped.
When talking to them about engine tuner they have nothing but praise for them.
As mentioned I'm not a customer but have asked Alan many questions over time,especially when I had my Evo 6 and he's always responded quickly and helpfully.
If you've got a problem or your friends have maybe you should do the same instead of pathetic sniping on other peoples threads.
Tim
When talking to them about engine tuner they have nothing but praise for them.
As mentioned I'm not a customer but have asked Alan many questions over time,especially when I had my Evo 6 and he's always responded quickly and helpfully.
If you've got a problem or your friends have maybe you should do the same instead of pathetic sniping on other peoples threads.
Tim
11 April 2012, 09:09 PM
#13
I have never actually had any dealings with engine tuner as yet but alot of my friends have had their engines built with them and mapped.
When talking to them about engine tuner they have nothing but praise for them.
As mentioned I'm not a customer but have asked Alan many questions over time,especially when I had my Evo 6 and he's always responded quickly and helpfully.
If you've got a problem or your friends have maybe you should do the same instead of pathetic sniping on other peoples threads.
Tim
When talking to them about engine tuner they have nothing but praise for them.
As mentioned I'm not a customer but have asked Alan many questions over time,especially when I had my Evo 6 and he's always responded quickly and helpfully.
If you've got a problem or your friends have maybe you should do the same instead of pathetic sniping on other peoples threads.
Tim
11 April 2012, 10:23 PM
#16
11 April 2012, 11:39 PM
#17
I'll be down there later this year hopefully. As soon as my weddings paid for and the future ex wife has nothing to nag about. Hear nothing but good things about et so will be hoping they take on my 2.1 build. Wiley are you still running an md321t?
12 April 2012, 01:40 PM
#20
I spent well under 2k at Enginetuner on map, brakes and suspension in November; prior to that Alan spent a good half hour on the phone and email answering my questions, another 20 mins on a test drive when I past by on my way to Cornwall, and taxied us into Plymouth.
I would not hesitate to return to Plymstock and ET, a round trip of 380 miles.
I would not hesitate to return to Plymstock and ET, a round trip of 380 miles.
05 May 2012, 09:43 PM
#25
just thought i'd like to update after another trip down to see alan and martyn at enginetuner
what can i say, these guys are amazing!
went there yesterday to get my car mapped after running her in, shes done around 1100 miles now. firstly had to carry out a oil (now on semi synthetic) and filter change. then it was time to get it mapped.
on the rollers for the 1st time, martyn straight away noticed that the tumble valve wasnt opening. long story cut short, they removed the inlet manifold (im impressed how quickly they removed it) took the tumble valves off, and did a made them work!
as time was ticking, alan and martyn knew that they needed more time spent on my car. alan offered me to stay in a hotel for a night! i was shocked, and at the same time delighted, they wanted to make sure everything was spot on before my trip back to Essex
next morning, martyn up early, gave me the wake up call and we cracked on
getting everything set up on the mapping side and a run on an A road to get it perfect
attention to detail and service is what the guys @ enginetuner is all about. the amount of cars that they're working on proves that people are going there for the same reason i am
4 hours later, i was back home. the journey home driving my car was amazing. car felt like a dream
i'll be seeing them again when i fit my 6 speed, and my rotated setup very soon !!
few pics of the trip
this engine in the murtaya
oil and filter change
on the dyno
end result on V power (was scared my 5 speed would go, but stayed strong)
LOL @ EVO BOYS TRYING TO FIND OUT WHY THERE CAR WAS SO SLOW (caps off)
wiley
what can i say, these guys are amazing!
went there yesterday to get my car mapped after running her in, shes done around 1100 miles now. firstly had to carry out a oil (now on semi synthetic) and filter change. then it was time to get it mapped.
on the rollers for the 1st time, martyn straight away noticed that the tumble valve wasnt opening. long story cut short, they removed the inlet manifold (im impressed how quickly they removed it) took the tumble valves off, and did a made them work!
as time was ticking, alan and martyn knew that they needed more time spent on my car. alan offered me to stay in a hotel for a night! i was shocked, and at the same time delighted, they wanted to make sure everything was spot on before my trip back to Essex
next morning, martyn up early, gave me the wake up call and we cracked on
getting everything set up on the mapping side and a run on an A road to get it perfect
attention to detail and service is what the guys @ enginetuner is all about. the amount of cars that they're working on proves that people are going there for the same reason i am
4 hours later, i was back home. the journey home driving my car was amazing. car felt like a dream
i'll be seeing them again when i fit my 6 speed, and my rotated setup very soon !!
few pics of the trip
this engine in the murtaya
oil and filter change
on the dyno
end result on V power (was scared my 5 speed would go, but stayed strong)
LOL @ EVO BOYS TRYING TO FIND OUT WHY THERE CAR WAS SO SLOW (caps off)
wiley
Last edited by wiley; 05 May 2012 at 09:46 PM.
05 May 2012, 11:25 PM
#30
Scooby Regular
Join Date: Nov 2006
Location: Enginetuner.co.uk Plymouth Dyno Dynamics RR Engine machining and building EcuTek SimTek mapping
Posts: 3,662
Likes: 0
Received 0 Likes
on
0 Posts
It was great to see you again Wiley, real petrol heads like yourself are what we live for.