Just ordered godspeed discs & kevlar pads - easy to fit?
#1
Scooby Regular
Thread Starter
Just ordered godspeed discs & kevlar pads - easy to fit?
I do most work myself on my cars, just wondered are the discs & pads a doddle to fit as will be doing them on Saturday morning.
#2
Scooby Regular
iTrader: (9)
Join Date: Nov 2008
Location: South Wales
Posts: 1,292
Likes: 0
Received 0 Likes
on
0 Posts
I changed the front discs & pads all round the other day.
The only git, was the calliper bolts on the Brembo's, but they came off in the end with no issues!
This was my first go at them& found them quite easy.
The only git, was the calliper bolts on the Brembo's, but they came off in the end with no issues!
This was my first go at them& found them quite easy.
#4
Scooby Regular
iTrader: (2)
Make sure that you clean the Brembo mounting bolts BEFORE attempting to remove them.
Also squirt with WD40 or similar the night before.
Use good quality tools: I've started buying 6-sided sockets for rusty nuts, less likely to slip.
DO remember to scrupulously clean the area of contact between the new disc and the hub. This is VERY important.
Also squirt with WD40 or similar the night before.
Use good quality tools: I've started buying 6-sided sockets for rusty nuts, less likely to slip.
DO remember to scrupulously clean the area of contact between the new disc and the hub. This is VERY important.
#5
Scooby Regular
Thread Starter
Ill post a pic once i receive them, ordered today for delivery tomorrow... thanks for the advice! I've got a shed full of the best quality tools so thats no issue. Cheers
#6
Scooby Regular
iTrader: (5)
Join Date: Oct 2006
Location: Ramsey, Cambs
Posts: 1,424
Likes: 0
Received 0 Likes
on
0 Posts
The rear discs can catch the unwary, see below
https://www.scoobynet.com/wheels-tyr...rake-disc.html
read first and avoid the tears
https://www.scoobynet.com/wheels-tyr...rake-disc.html
read first and avoid the tears
#7
Scooby Regular
iTrader: (1)
Join Date: Oct 2011
Location: folkestone
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
Just fitted them to the rear of my bug. Really easy to do done the pair in a hour. Hey yourself a new pair of pins mine were corroded did clean them them up but will fit new pins at the weekend
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM