wrxcook

Hi people do any of use know where the best place to buy a crank position sensor is ( not cam position) for a 2003 wrx, any help would be greatly appreciated

wrxcook

Anyone?

jura11

iTrader: (7)

Just question,you are suffering(or suffered) with Camshaft CEL?
If yes,i would say after reset ECU this error code will disappear or just after few start disappear too,this error code on ALL WRX and mainly you can suffer if you are over revving engine or if you are hit the RPM limiter...

If its this case,i wouldn't buy new sensor,this happens again if you are hit limiter too with new sensor

Jura

wrxcook

I'm getting the cell when I put the foot down in 4th and 5th gear, say I'm sitting at 3000rpm on the motor way by the time I'm at 3.5 to 4000rpm the cell will flash I've already replaced the cam sensor so I'm going to try the crank sensor

wrxcook

Any more thoughts people

jura11

iTrader: (7)

You have any error code?

If you have OBD reader have look what error you have(can be stored as Historic error) and from this i would go,no just buying what you will not need at the end


Jura

wrxcook

Error code reads crank position sensor when I bought the cam I bought the wrong part but fitted it anyway

tim's wrx

http://www.subarupartsforyou.com/cp_...hp?partid=3083

Looks like it's the same part used for all types of Imprezas 1993 - 2011 so should be widely available from Subaru breakers. I have used the following breakers for a throttle position sensor and they were excellent and for a fraction of the price of new!!!-

IMPREZA BREAKERS LIMITED

HOWE PITTS,NORWICH ROAD

BROOKE,NR15 1HJ

tel 01508 558880

tim's wrx

Hi - before you buy - I would remove the existing crank sensor and check the wiring and connections and clean up. Maybe it's nothing more than that? cheers