NormantheDog

I was washing my car before Christmas and the foam piece with a short piece of double sided tape in the photo below, fell out through the front bottom grill. I am assuming it should be somewhere behind the fog light? Does anyone know where it should go and how important it is to go back? Please don't tell me it is vital and I have to take the front bumper off!

NormantheDog

Terminator X

iTrader: (7)

Foam you say, thought they were made of chocolate

TX.

tubbytommy

iTrader: (20)

the flux capacitor maybe?

Don Clark

Item marked in red......................

Attaches either side of lower opening assumingly to help direct air into the rad and not into the wheel arches.
Have had to stick mine back in with some heavier double sided tape. (yours seems to lacking in it)

Flaps

iTrader: (1)

Boo! We could have had some fun with that

Great picture and helpful post though, where did you get that picture from?

NormantheDog

Thanks Don. So they sit directly behind the front bumper and span to the rear closing off the sides either side of the front opening i.e. sitting vertically running from front to rear if that makes any sense?

Don Clark

Yep, the other side should still be in there, they sit a little way in out of direct view

justin_watson

You are a Scooby geek! in a good way of course! Great diagram!

juggers

iTrader: (1)

Don Clarke your a legend mate you go beyond the call of duty every time to help members.

Don Clark

I try where I can

Budgie

iTrader: (4)

He is "The Don"

Don Clark

Markyscoob

I see Subaru are still sending out microfiche showing the fog light covers and blanks with the same part numbers then....some things never change...

Don Clark

The numbers shown on the drawing are the "part code" numbers NOT the actual "part number".

You obviously don't know the system well enough.

ps microfiche went out with the arc..........