removing rear shocks on a hawk
and then push upwards to remove.
08 December 2011, 09:19 PM
#3
Scooby Newbie
Join Date: May 2011
Location: Buckingham
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
You just need to remove the rear seats. Two bolts on the lower part of the seat (flick the black round plastic covers off) these are about where your ankles would be if sat there.Pull the lower seat forward and up a bit and remove.You sould be able to see another 4 bolts the same size where the seat belts are mounted,remove them and then raise the back up and then remove (the back part is secured by 3 hooks this is why you need to lift it first.
Hope this helps as I changed my dampers not long ago on my Hawkeye.
Hope this helps as I changed my dampers not long ago on my Hawkeye.
Last edited by 777HAM; 08 December 2011 at 09:25 PM.
08 December 2011, 09:21 PM
#4
Scooby Regular
Thread Starter
Join Date: Nov 2011
Location: south wales
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
do i need to do bases and backs of seats? how to i get to the heads they look like there beind the cusions? sorry first time working on her 
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM