Blitz hitting suspension arm/chassis....
13 September 2011, 10:24 PM
#1
Scooby Regular
Thread Starter
Join Date: Dec 2004
Location: enfield
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
Blitz hitting suspension arm/chassis....
Anyone else had this problem? its driving me nuts as I hate rattles!
I have a 2007 hawkeye and straight exit blitz, had to cut a corner out of the diffuser out as it rubbed slightly, but it seems where the 3" pipe increases close to the 2.5 connector on the backbox it fouls the chassis where it conects with a wheel/suspension arm!
The upshot is a "rattle" at low revs because the vibration causes it to rub knock and also over bumpy roads!
Anyone else had this problem?
Only thing I can think to do is get the hanging arms lengthened by an 1" or so "or" can you get slightly longer rubber connectors for chassis/exhaust mount?
Suggestions?
I have a 2007 hawkeye and straight exit blitz, had to cut a corner out of the diffuser out as it rubbed slightly, but it seems where the 3" pipe increases close to the 2.5 connector on the backbox it fouls the chassis where it conects with a wheel/suspension arm!
The upshot is a "rattle" at low revs because the vibration causes it to rub knock and also over bumpy roads!
Anyone else had this problem?
Only thing I can think to do is get the hanging arms lengthened by an 1" or so "or" can you get slightly longer rubber connectors for chassis/exhaust mount?
Suggestions?
13 September 2011, 10:51 PM
#3
Guest
Posts: n/a
never heard of a problem with blitz. mine is spot on. 04 sti. id check that the mounts you used are the correct ones and check that the hangers are not bent during transit etc....
if you are not sure, get under there and take some pics of the above parts and im sure well get it sorted.
dan
if you are not sure, get under there and take some pics of the above parts and im sure well get it sorted.
dan
13 September 2011, 11:00 PM
#4
Scooby Regular
Thread Starter
Join Date: Dec 2004
Location: enfield
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
Nur spec S connected to a stright thru non-res centrepipe, all seems very odd tbh!
Everything else seems spot on?
Will get a couple of pics up tomorrow
Everything else seems spot on?
Will get a couple of pics up tomorrow
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
crazyspeedfreakz
Wanted
17
05 October 2015 07:19 PM