Thanks to Andrew carr
Trending Topics
01 September 2011, 10:48 AM
#8
Scooby Senior
iTrader: (3)
Join Date: Jun 2006
Location: Slowly rebuilding the kit of bits into a car...
Posts: 14,333
Likes: 0
Received 0 Likes
on
0 Posts
I always enjoy a mapper at work, and I'm only driving the car...
Good to see that the car is as good as you hoped Roy.
dunx
Good to see that the car is as good as you hoped Roy.
dunx
07 September 2011, 09:37 AM
#12
Well the car is finally mapped. A massive thank you goes out to andrew car, firstly for mapping the car after work and secondly for doing such a thorough job, this is the second car he's done for me and again it's turned out great. Spent about 2 and a half hours tinkering with different settings, resulting in a very smooth delivery which pulls to the red line.
We did try pops and bangs but the system on the car along with the prodrive cat simply quiets it down too much. Pity really but I don't want a super loud system.
Also fitted the launch control map, may try it eventually lol
all in all a great experience and a much more drivable car. The over boost originally was due to the wrong size pill being fitted and we believe it has a newer spec td04 fitted due to the figures it was pulling.
We did try pops and bangs but the system on the car along with the prodrive cat simply quiets it down too much. Pity really but I don't want a super loud system.
Also fitted the launch control map, may try it eventually lol
all in all a great experience and a much more drivable car. The over boost originally was due to the wrong size pill being fitted and we believe it has a newer spec td04 fitted due to the figures it was pulling.
07 September 2011, 09:47 AM
#13
Top Bloke !
If you ever needed some pre-map work doing, then I can recommend both Andrew and Brian, both work from the same unit in Lower Darwen.
My example was, drop car off at Brian's, he installed new engine, turbo, headers, intake, etc etc, Andrew plugged it up to then made sure it was running sweet, and then after a few more miles between Andrew and Brian making sure it was running as it should, Andrew and Brian then mapped the car for me!!!
A superb service for those that are short of time, or just want to hand the car and keys over with a boot load of goodies and get them installed and mapped without the hassle of getting someone else to do it, and then limping the car to Andrew!.
Rob
If you ever needed some pre-map work doing, then I can recommend both Andrew and Brian, both work from the same unit in Lower Darwen.
My example was, drop car off at Brian's, he installed new engine, turbo, headers, intake, etc etc, Andrew plugged it up to then made sure it was running sweet, and then after a few more miles between Andrew and Brian making sure it was running as it should, Andrew and Brian then mapped the car for me!!!
A superb service for those that are short of time, or just want to hand the car and keys over with a boot load of goodies and get them installed and mapped without the hassle of getting someone else to do it, and then limping the car to Andrew!.
Rob
19 November 2011, 08:36 PM
#14
Scooby Regular
Join Date: Feb 2011
Location: worksop
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
andy carr will be mapping my classic on simtec very soon......cant wait very professional conversation on the phone, and put my mind at rest. cant wait to feel the results.
19 November 2011, 09:22 PM
#16
Andrew is a top bloke takes his time and explains everything to you and if there is a problem with your car he wont leave it untill he has found the problem and fixed it
20 November 2011, 12:17 AM
#19
Scooby Regular
iTrader: (2)
Join Date: Oct 2011
Location: Midlands
Posts: 557
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone know if Andrew will travel? I bought my car from a guy in Preston who used Andrew, but i'm in the midlands so it's a fair old trek for me for any map tweaks.
Thanks
Thanks
20 November 2011, 12:26 AM
#20
Scooby Regular
iTrader: (6)
Join Date: Oct 2010
Location: breaking 420 bhp high spec classic
Posts: 1,735
Likes: 0
Received 0 Likes
on
0 Posts
yes he does mate the best thing to do is to ring pole position up in willenhall and ask them the next time he is coming to them cause he wont travel down here for just 1 car if that helps u
20 November 2011, 10:23 AM
#25
Scooby Regular
iTrader: (6)
Join Date: Oct 2010
Location: breaking 420 bhp high spec classic
Posts: 1,735
Likes: 0
Received 0 Likes
on
0 Posts
ive had my car done by him and exellent service i had my car done by another reputable mapper everyone on here thinks hes a god and tbo not happy with the result. just didnt spend the time on the car that andrew did. example put me a map switch in and just left it on a wire dangling. im not going to say who it was because everyone will go mad that im saying something bad about a god apparently of mappers well sorry he just isnt imho just my op tho
21 November 2011, 08:34 PM
#30
Scooby Regular
iTrader: (16)
Join Date: Jan 2010
Location: In Paradise
Posts: 3,097
Likes: 0
Received 0 Likes
on
0 Posts
I know of at least 20 cars that Andy has mapped for a friend of mine, cant recommend him highly enough. He travels to Scotland all the time. Top bloke.