Simtek 2 stage map
#3
Scooby Regular
Join Date: Jul 2006
Location: In front of my computer
Posts: 1,696
Likes: 0
Received 0 Likes
on
0 Posts
#4
If on a switch then when switch is grounded map 2 is enabled.
If no switch is fitted then throttle pedal activates as follows:
1.With Ign OFF fully depress throttle pedal.
2.Turn In ON keeping pedal depressed but don't crank engine.
3.Wait for 5 secs and Tacho will go to 1(000) or 2(000) indicating which map is active.
4.If active map is required map then release pedal and start engine.
5.If map is to be changed then release pedal, then fully depress again.Wait until Tacho goes to required map then release pedal and start engine.
Steve
If no switch is fitted then throttle pedal activates as follows:
1.With Ign OFF fully depress throttle pedal.
2.Turn In ON keeping pedal depressed but don't crank engine.
3.Wait for 5 secs and Tacho will go to 1(000) or 2(000) indicating which map is active.
4.If active map is required map then release pedal and start engine.
5.If map is to be changed then release pedal, then fully depress again.Wait until Tacho goes to required map then release pedal and start engine.
Steve
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM