TY754VBAAA
#1
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: Feb 2007
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
TY754VBAAA
Hi just wanted some advice, iv just paid 400 for a TY754VBAAA box just wondered if its an ok price and does it have dccd, is this going to be ok for 350bhp.
also wanted to no if it will match my current diff iv currently got a ty752vb33a.
also wanted to no if it will match my current diff iv currently got a ty752vb33a.
#3
Scooby Regular
iTrader: (51)
It's a 5 speed box with no DCCD. It was used in the P1. Much stronger than the 752 box and a good one used considerately will handle 400 bhp.
It has close 1st to 4th (same ratio as sti3) and a longer 5.
The box was also used in STI 5/6 and uses a 4.444 rear diff.
£400 is about right. I just paid £380 for one including diff, shafts etc etc.
You have a 93 car I think, using 4.111 rear diff. So the box won't be a direct fit, you'll need all the other bits.
I may be able to help you out there. PM me.
It has close 1st to 4th (same ratio as sti3) and a longer 5.
The box was also used in STI 5/6 and uses a 4.444 rear diff.
£400 is about right. I just paid £380 for one including diff, shafts etc etc.
You have a 93 car I think, using 4.111 rear diff. So the box won't be a direct fit, you'll need all the other bits.
I may be able to help you out there. PM me.
Last edited by MattyB1983; 25 April 2011 at 09:11 AM.
#5
Scooby Regular
iTrader: (51)
Use this chart to help you
http://spda-online.ca/modules/tinyco...ite/tc_28.html
The OP has a import I think, from the chart it says he has a 1993 WRX. He'll deffo need diff.
http://spda-online.ca/modules/tinyco...ite/tc_28.html
The OP has a import I think, from the chart it says he has a 1993 WRX. He'll deffo need diff.
Thread
Thread Starter
Forum
Replies
Last Post
crazyspeedfreakz
Subaru Parts
14
11 October 2013 11:54 AM