The Rig

iTrader: (13)

Anyone else have the annoying problem of the wind whistling thru the window glass at high speed,well,not high speed but 70+ on a classic,tho i guess all models.

I have replaced the door rubbers with 2 sets of 2nd hand ones,didnt cost much hence the try,but still the wind noise is there,surely all 3 sets cant be worn ?

its almost as if the glass isnt being pulled onto the rubber as tight as it should,darling

i have adjusted the glass steady thingy when you remove the door panel,but this only stops the glass from wobbling,not pulling onto the door rubbers

so,is it just a nice trait after all these yrs i have to live with ?

matt-c

iTrader: (5)

On my airfield i get that at 120+ on a Newage

Billet

iTrader: (60)

it must just be the age of the car or the mechanism in the door. i don't get it in my blobeye at err, bit more than ^^^^^

The Rig

iTrader: (13)

Hmm,maybe its the age,just seems like a mm or 2 would sort it,if the glass had more of a pull on it when the door was shut

bugeyejohn

iTrader: (11)

Mine does it as well,if i drop the window a touch then do it back up it goes? i was thinking about putting a little foam between the 2 layers to pack it out a little but have never got round to it.

burbling1

iTrader: (1)

If I put my windows up with the door shut I get a lot of wind noise, but if I put the window up with the door open its fine. It must push the rubber up and not seal correctly.

scousefly

What about driving slower??

nosjunkie

iTrader: (7)

you have my sympathy
mine howls but mainly if i have closed the window with the door closed quite often i will pull up at the lights and open and close the door to stop it i have tried re adjusting the glass which made it a bit better but problem remains

DonNedly

iTrader: (10)

seems to affect the classics.
I don't get it on my blobeye but it was really annoying on a jdm classic sti i test drove, put me off buying it. The owner said it was a common thing on jdm classics

nosjunkie

iTrader: (7)

mines a 99my uk if it makes a difference

The Rig

iTrader: (13)

cheers guys,at least im not alone/my car is fubard LOL and yeah,mine is a JDM classic,so sob

might try the foam or some silicone on the rubber,let it set a bit,shut the door to mold round the lip of the glass etc then open door to allow silicone to fully dry