greenfumb

does anyone know how to remove the heater surround on my 93 wrx cant see anything obvious and dont wanna break anything. thanks

leecalcars

iTrader: (37)

Just removed mine on myoo classic it's easier to take the dash out to get to the bolts holding it on .
You have to disconnect pull cords from switches first and there's the main water pipe that goes to the heater matrix that needs disconnecting and blocking off. The rest is self explanitry when dash is removed

Stig67

iTrader: (2)

heater surround has 2 screws ,,i think thay are on the plastic bit between the top of your dials and bottom of the vents ,under the edge of it

Stig67

iTrader: (2)

1,05am just went out to look
look at your heater dials the right screw is just over where its says auto on your heater speed setting and left hand screw is over the heat direction dial
take screws out and pull it
all that comes off is the suround and the 2 vents the dials stay
hope that helps dont take the dash out

after suround is off its 4 screws to take the control unit out and 2 plugs

--------------------------------------------------------------------------------