When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Location: Enginetuner.co.uk Plymouth Dyno Dynamics RR Engine machining and building EcuTek SimTek mapping
Posts: 3,662
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by leecalcars
Looking for somewhere that will supply and fit a swirl pot into my track are these an easy job to do ?
Our method is to use a 1 litre pot, fitted to the nearside inner engine compartment. This feeds a Bosch 044. We feed the pot from the stock fuel pump with a return via the original return line. You end up with two fuel circuits, one via the stock pump and one via the fuel rail.
We relay the Bosch pump feed, picked up from the standard system.
The benefits are an adequate fuel supply, no surging and a safe system using the original crash protection.