PS13 ECU MONITOR
06 January 2011, 10:14 PM
#1
Scooby Regular
Thread Starter
iTrader: (37)
Join Date: Jan 2005
Location: never far away from my impreza
Posts: 7,843
Likes: 0
Received 0 Likes
on
0 Posts
PS13 ECU MONITOR
Posting this for a mate who wants some info as automotive technologies have gone bust and he can't get the wiring info he needs.
The PS13 has a green LCD display not the blue type apparently they are different not sure.
but he needs to wiring detail to add an oil temp and oil pressure can any help him, i think there are 2 terminals 1 for each but the sender units are 2 wire so needs to know the correct terminals to wire to as there are 3 in the back of the dash unit .
cheers lee
The PS13 has a green LCD display not the blue type apparently they are different not sure.
but he needs to wiring detail to add an oil temp and oil pressure can any help him, i think there are 2 terminals 1 for each but the sender units are 2 wire so needs to know the correct terminals to wire to as there are 3 in the back of the dash unit .
cheers lee
06 January 2011, 10:54 PM
#2
CONNECTOR 1
PIN 1 - COMMUNICATIONS (TO OBD CONNECTOR PIN 7)
PIN 2 - RESERVED
PIN 3 - RESERVED
PIN 4 - POWER GROUND (TO OBD CONNECTOR PIN 5)
PIN 5 - POWER POSITIVE (TO OBD CONNECTOR PIN 16)
CONNECTOR 2
PIN 1 - WARNING AND SHIFT LIGHT POSITIVE
PIN 2 - WARNING AND SHIFT LIGHT GROUND
PIN 3 - WATER INJECTION RELAY POSITIVE
PIN 4 - WATER INJECTION RELAY GROUND
PIN 5 - SENSORS GROUND
PIN 6 - SENSORS +5V
PIN 7 - RESERVED
PIN 8 - RESERVED
PIN 9 - RESERVED
PIN 10 - OIL TEMPERATURE SENSOR INPUT
PIN 11 - OIL PRESSURE SENSOR INPUT
PIN 12 - RESERVED
You'll need PIN's 10 and 11 for the sensors, and then 5 for both of the other wires on the sensors.
PIN 1 - COMMUNICATIONS (TO OBD CONNECTOR PIN 7)
PIN 2 - RESERVED
PIN 3 - RESERVED
PIN 4 - POWER GROUND (TO OBD CONNECTOR PIN 5)
PIN 5 - POWER POSITIVE (TO OBD CONNECTOR PIN 16)
CONNECTOR 2
PIN 1 - WARNING AND SHIFT LIGHT POSITIVE
PIN 2 - WARNING AND SHIFT LIGHT GROUND
PIN 3 - WATER INJECTION RELAY POSITIVE
PIN 4 - WATER INJECTION RELAY GROUND
PIN 5 - SENSORS GROUND
PIN 6 - SENSORS +5V
PIN 7 - RESERVED
PIN 8 - RESERVED
PIN 9 - RESERVED
PIN 10 - OIL TEMPERATURE SENSOR INPUT
PIN 11 - OIL PRESSURE SENSOR INPUT
PIN 12 - RESERVED
You'll need PIN's 10 and 11 for the sensors, and then 5 for both of the other wires on the sensors.
top man thanks !
07 January 2011, 12:08 AM
#6
Scooby Regular
Thread Starter
iTrader: (37)
Join Date: Jan 2005
Location: never far away from my impreza
Posts: 7,843
Likes: 0
Received 0 Likes
on
0 Posts
not sure mate my mates was in his car when he got it ,but from what iv'e seen its a good bit of kit records all sorts ,highest boost etc... il check and let you know on here.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM
