95 WRX Help PLEASE ??
#1
Scooby Regular
Thread Starter
Join Date: Mar 2006
Location: Surrey
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
95 WRX Help PLEASE ??
We've just recently started havin an issue wit the car running lean
It's my missus's car & she noticed it after I replaced No. 3 leaky injector. Could of been there before tho !! The car is runnin rough & hesitates up the rev range & simply doesn't have the torque it used too !!
The AFR guage doesn't move much past lean & thats after a drive !! Have replaced the o2 sensor for a new one & MAF sensor for a known good one.
Have a Walbro 255 pump, adjustable FPR & fuel pressure is 3bar (vacuum removed) 2.4bar with vacuum. Doesn't seem down on boost, vacuum on idle seems fine, have checked for leaks & found none.
What else could it possibly be ?? Got a new set of injectors comin, but until then I chucked some injector cleaner in & made no difference, car's always run on Vpower.
Looking for help please as I'm runnin outta idea's, gonna check the TPS tomorrow & have checked all earth's battery voltage, alternator charging @ 14.1v, ecu seem's good & no codes stored !!
Thanking you in advance
jb
It's my missus's car & she noticed it after I replaced No. 3 leaky injector. Could of been there before tho !! The car is runnin rough & hesitates up the rev range & simply doesn't have the torque it used too !!
The AFR guage doesn't move much past lean & thats after a drive !! Have replaced the o2 sensor for a new one & MAF sensor for a known good one.
Have a Walbro 255 pump, adjustable FPR & fuel pressure is 3bar (vacuum removed) 2.4bar with vacuum. Doesn't seem down on boost, vacuum on idle seems fine, have checked for leaks & found none.
What else could it possibly be ?? Got a new set of injectors comin, but until then I chucked some injector cleaner in & made no difference, car's always run on Vpower.
Looking for help please as I'm runnin outta idea's, gonna check the TPS tomorrow & have checked all earth's battery voltage, alternator charging @ 14.1v, ecu seem's good & no codes stored !!
Thanking you in advance
jb
#2
Scooby Regular
iTrader: (19)
Join Date: Nov 2005
Location: notts
Posts: 2,770
Likes: 0
Received 0 Likes
on
0 Posts
if the injector is the same and seating proper.
should all be fine
id recheck if its seating proper
as thats a commen issue after fitting injectors.
on way to tell. take the fuel hoses of the manifold, wipe them and blow down them if you can hear the air escaping then thats the issue
should all be fine
id recheck if its seating proper
as thats a commen issue after fitting injectors.
on way to tell. take the fuel hoses of the manifold, wipe them and blow down them if you can hear the air escaping then thats the issue
#3
Scooby Regular
iTrader: (8)
We've just recently started havin an issue wit the car running lean
It's my missus's car & she noticed it after I replaced No. 3 leaky injector. Could of been there before tho !! The car is runnin rough & hesitates up the rev range & simply doesn't have the torque it used too !!
The AFR guage doesn't move much past lean & thats after a drive !! Have replaced the o2 sensor for a new one & MAF sensor for a known good one.
Have a Walbro 255 pump, adjustable FPR & fuel pressure is 3bar (vacuum removed) 2.4bar with vacuum. Doesn't seem down on boost, vacuum on idle seems fine, have checked for leaks & found none.
What else could it possibly be ?? Got a new set of injectors comin, but until then I chucked some injector cleaner in & made no difference, car's always run on Vpower.
Looking for help please as I'm runnin outta idea's, gonna check the TPS tomorrow & have checked all earth's battery voltage, alternator charging @ 14.1v, ecu seem's good & no codes stored !!
Thanking you in advance
jb
It's my missus's car & she noticed it after I replaced No. 3 leaky injector. Could of been there before tho !! The car is runnin rough & hesitates up the rev range & simply doesn't have the torque it used too !!
The AFR guage doesn't move much past lean & thats after a drive !! Have replaced the o2 sensor for a new one & MAF sensor for a known good one.
Have a Walbro 255 pump, adjustable FPR & fuel pressure is 3bar (vacuum removed) 2.4bar with vacuum. Doesn't seem down on boost, vacuum on idle seems fine, have checked for leaks & found none.
What else could it possibly be ?? Got a new set of injectors comin, but until then I chucked some injector cleaner in & made no difference, car's always run on Vpower.
Looking for help please as I'm runnin outta idea's, gonna check the TPS tomorrow & have checked all earth's battery voltage, alternator charging @ 14.1v, ecu seem's good & no codes stored !!
Thanking you in advance
jb
You 'seem' a little vague when talking about the boost/vacuum, do you have a boost gauge fitted?
#4
Scooby Regular
iTrader: (2)
Yes it has a boost gauge fitted, as far as the gauge is concerned it is fine, doesnt seem to be down on boost and vacum is reading what it always has.
Plugs are PRF7 and were replaced approx 5k ago.
Any other ideas?
Thanks!!
Plugs are PRF7 and were replaced approx 5k ago.
Any other ideas?
Thanks!!
Last edited by Kirstiestar; 20 October 2010 at 01:02 PM.
Trending Topics
#8
ACCOUNT UNDER INVESTIGATION
Join Date: Jun 2010
Location: SPENNYMOOR,DURHAM
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
I would take it to a scooby specialist asap,let them have a look and they should be able to inform you of any problems you have with the car/give you advice on what action needs taken if any.
Dan
05 jdm sti
400/400
Dan
05 jdm sti
400/400
#9
ACCOUNT UNDER INVESTIGATION
Join Date: Jun 2010
Location: SPENNYMOOR,DURHAM
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
I would take it to a scooby specialist asap,let them have a look and they should be able to inform you of any problems you have with the car/give you advice on what action needs taken if any.
Dan
05 jdm sti
400/400
Dan
05 jdm sti
400/400
Thread
Thread Starter
Forum
Replies
Last Post
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM
supshon
General Technical
2
03 October 2015 08:06 PM