Hi guys!

I've made it to the final of the Impreza Idol 2010

I would really appreciate some votes to help me through!


Its free and only takes a sec!
http://www.totalcarmagazines.co.uk/i...FINAL-2010.htm


I'm number 7 on the list and i am very greatful for every vote i might recieve!

some pics as submitted FYI:

 

I've voted for ya. I don't really like the headlights, but I can see you need the cold air.

 

vote from a fellow p1 owner mate :-)

 

Cheers guys! Much appreciated!

 

Bump!

 

You got mine. Looks like it's between you and No.1. Good luck.

 

+1

 

Thanks guys! Its going to be a looong month!

Much appreciated!

 

isnt it mint?!! v. jealous...got my vote!

 

Voted - not a lot in it though

 

Thanks alot guys!

I know, its going to be a close one! *gulp!*

 

Voted mate, lovely car. You must devote alot of time to it!!
Looks like you have the lead!

 

Thanks mate! The car has literally taken over my life, you have no idea!

When i got with my Mrs the car was off the road for 6 months having rebuild and other bits and bobs. Boy did she get a shock when the car came back lol!

 

My missus goes mental if i stay an hour after work to do an oil change!

Still, good luck mate. Looks like the win is there for you.

 

Thanks bud! I have my fingers firmly crossed!

 

voted

Nice modified example...

 

Cheers Scooby! i've tried to keep it as tasteful as possible!?

 

Voted again using my home laptop this time!!

 

voted mate, lovely car!!!

 

Thanks alot guys, much appreciated!

 

bump! Please keep the votes comin guys! Its a very close race!

Thanks for your support!

 

voted

 

Thanks mate!

 

Hi Guys, these are the pics which I submitted BTW, these will all be in the mag when it comes out. I’ve attached my Spec list below too if anyone is interested?


Please get your votes in for Car 7 - Matt Johnson!
http://www.totalcarmagazines.co.uk/i...FINAL-2010.htm












Engine Internal:
2.15ltr Stroker kit 8.4:1 CR
Closed Deck Block
Under piston oil jets
Bored and rehoned to 92.5mm
Modified oil ways
2.5 STi 79mm cross drilled nitride crank
Mahle 2618 race material lower deck stroker pistons
Mahle piston rings and gudgeon pins
14mm head stud converted
14mm ARP head bolt set Rear thrust converted
Manley steel H section rods
ARP2000 rod bolts
ACL full RACE bearing set
0.6mm 3 layer Cometic head gaskets


Engine External / Ancillaries:
Lateral Performance MD321T Turbo w 76mm Inlet
Lateral Performance turbo fitting kit
Lateral Performance custom 76mm inlet hose with breather blocked off
Syvecs ECU c/w Wideband control & Calibration switch
Nismo 740cc flow matched injectors
Fuel lab fuel pressure regulator c/w pressure gauge
Bespoke made parallel stainless braided fuel rails
Bespoke made stainless braided fuel lines
Systec Billet fuel filter
Walbro 290 High Flow Fuel Pump
SETRAB 26 row Oil Cooler with bespoke made stainless braided lines
Mocal Themostatic Plate
RCM Nickel plated light-weight pulleys
RCM 12mm modified high flow oil pump
RCM Oil catch tank
RCM billet timing belt guide
RCM 3" gas flowed down pipe
RCM Hi Flow Induction
RCM 80mm Induction Trumpet
102mm bore cold air feed through headlight
HKS 3” Hi-Power Strait through Centre pipe
HKS 3” Hi-Power back box
GT spec Gen II FMIC
GT spec Gen II Tubular unequal length headers
Harvey Smith Custom up-pipe
Cosworth sump baffle
Group N Engine mounts
3 Bar MAP sensor
3 port boost control solenoid
Headers DEI Titanium heat-wrapped
Up-pipe DEI Titanium heat-wrapped
Downpipe DEI Titanium heat-wrapped
Exedy Single Plate Organic Clutch
Fidanza 4.4kg Lightweight Flywheel
NGK PFR7B spark plugs gapped to 0.6
Ported throttle body,
Insulating manifold spacers
Header tank spacers
J Performance High capacity Aluminium Radiator
Prodrive Slam Panel
Full Samco setup
Heavy Duty Battery
Hot coolant throttle body bypass
PowerFlex Polyurethane Exhaust Hangers
Magnecor HT Leads
71 degree thermostat
HKS LTD Ed. 1.1 header tank cap
HKS LTD Ed. Billet oil filler cap
Dump valve blocked off


Handling:
Prodrive Alcon 330mm Brake Upgrade
330mm Godspeed Rotors
316mm rear Brembo 2pot conversion
Whiteline 22mm adjustable ARB
Whiteline rear Droplinks
Whiteline front sway bar bushes
Whiteline steering rack bushes
Whiteline front anti-lift kit
Harness Support Bar
Sabelt Harnesses
PowerFlex Wishbone Bushes
Prodrive geometry Stage 1 fast road setup
Anodised blue split bells
F+R Braided Hoses
Ferodo DS2500 Pads
Goodyear Eagle F1 tyres


Interior:
Defi-Link white face Gauges
Remote knocklink display mounted in clocks
Prodrive Gear Surround
Sabelt Harnesses
Harness Suport Bar
Tyre Pressure and Temp monitor
Bespoke made Carbon dash on the way!
STi Electric Folding Mirrors
STI pedals
STi Door Sills
P1 Plaque
Prodrive Gear ****
Prodrive Mats inc Boot mat


Exterior / Styling:
74F P1 Blue Painted bonnet (underside)
74F P1 Blue rocker covers
74F P1 Blue timing belt cover
74F P1 Blue fan shroud
74F P1 Blue centre band on alternator
Polished alternator casing
Powder coated FMIC pipes
Custom powder-coated header tank
Custom powder-coated Power steering tank
Painted / powder-coated brackets
Bespoke made Carbon inner wing plate
Colour coded performance hoses
All nuts and bolts replaced for stainless options
Tein Bonnet Dampers
Custom Grille badge
D1 Spec lightweight wheel nuts
22b bonnet vent
Induction scoop (air guided)
HID Conversion
LED sidelights and number plate lights
Front quad Lights
Rear STi Lights
Crystal Pack
Personalised Plates
Tinted windows
Prodrive Battery Clamp
Subaru Colour Coded Side Protectors
Shark’s Fin Arial
Iridium Effect Indicator Bulbs Rear
Silver Tech Bulbs Front

 

Bump!

 

Where you currently placed spooky??

 

i be just off junction 4 of the M25 I flick between there and Brighton as the Mrs is in Brighton!

 

Would be nice to see this little gem in the flesh! Shame youre the other side own town!!

 

Have to say m8 that Bay looks great

 

jealous...got my vote! very nice car m8