APS Cold air feed kit and FMIC
#1
APS Cold air feed kit and FMIC
Does anyone know if you can keep an APS 65mm cold air intake (wing mounted) and get away with the piping from a FMIC going over the top?
Also with the HKS SSQV do you need to get an adaptor to change the fitting from the OEM intercooler fit to the outlet on the FMIC piping
Also with the HKS SSQV do you need to get an adaptor to change the fitting from the OEM intercooler fit to the outlet on the FMIC piping
Trending Topics
#8
The adaptor I'm after Harvey is one like this
I'm looking at running a small piece of hose from my FMIC piping onto this flange and attach my HKS SSQV to this
I'm looking at running a small piece of hose from my FMIC piping onto this flange and attach my HKS SSQV to this
Last edited by Bockett; 20 October 2010 at 09:20 PM.
#9
Scooby Regular
iTrader: (1)
Join Date: Apr 2005
Location: In the Flatlands of Lincolnshire
Posts: 2,892
Likes: 0
Received 0 Likes
on
0 Posts
Give DSAutomotive a call they are APS dealers.
http://www.dsautomotives.co.uk/pages/our_workshop.html
http://www.dsautomotives.co.uk/pages/our_workshop.html
#10
Give DSAutomotive a call they are APS dealers.
http://www.dsautomotives.co.uk/pages/our_workshop.html
http://www.dsautomotives.co.uk/pages/our_workshop.html
#11
Former Sponsor
iTrader: (48)
Looks like a photo of one of my flange adaptors.
See post above.
harveysmith1@btopenworld.com
See post above.
What model, what year and what intercooler?
Flange adaptor will allow you to retain BOV.
Flange adaptor will allow you to retain BOV.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM