scooby sti wrx import
02 October 2010, 07:19 PM
#1
Scooby Newbie
Thread Starter
Join Date: Aug 2010
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
scooby sti wrx import
hi guys i have a impreza sti wrx import to start off the car wld not rev past 4rpm so i changed the oxgyen sensor and it still did it so changed the boost solenoid and the maf and still the same i found out it was the pipe under the inter cooler so go a new one but now the car is even worse then it was before and now on the fault code it is say number 45 which is pressure sensor but which sensor does it mean thanks can any one help me cheers
02 October 2010, 07:40 PM
#2
Scooby Regular
Join Date: Aug 2006
Posts: 1,224
Likes: 0
Received 0 Likes
on
0 Posts
Get it looked at by someone who knows what they are doing? Sounds like you are just trying random new parts.
Where are you based....someone will be able to point you in the right direction. Would also help others to offer advice if you specify the model year.
And, last but not least, welcome to SN
Where are you based....someone will be able to point you in the right direction. Would also help others to offer advice if you specify the model year.
And, last but not least, welcome to SN
02 October 2010, 07:49 PM
#4
Scooby Regular
iTrader: (3)
Join Date: Aug 2000
Location: 1600cc's of twin scroll fun :)
Posts: 25,565
Likes: 0
Received 2 Likes
on
2 Posts
Michelle, do you know what model year your car is, ie MY99 (a 1999 model year car, which would be a version 5 STI, 2000 or MY00 would be a version 6) as there are quite a few different years and they do vary a fair bit mechanically.
Tony
Tony
02 October 2010, 07:54 PM
#7
Scooby Regular
iTrader: (3)
Join Date: Aug 2000
Location: 1600cc's of twin scroll fun :)
Posts: 25,565
Likes: 0
Received 2 Likes
on
2 Posts
Hmmm they didnt have any STI's with red top engines in 1993 
so its either had an engine transplant (the red top engines were not fully intergrated into the STI range until the version 3's which were 1997 cars), or its had the inlet manifold sprayed, could be complicated if its the wrong engine etc for the car....
The first production STI (some call it a version 1 but its not, its just an MY94 STI as they didnt know they were going to do any more
) was in 1994, limited model numbers.
Tony
so its either had an engine transplant (the red top engines were not fully intergrated into the STI range until the version 3's which were 1997 cars), or its had the inlet manifold sprayed, could be complicated if its the wrong engine etc for the car.... The first production STI (some call it a version 1 but its not, its just an MY94 STI as they didnt know they were going to do any more
) was in 1994, limited model numbers.Tony
Trending Topics
02 October 2010, 08:51 PM
#10
Scooby Regular
iTrader: (3)
Join Date: Aug 2000
Location: 1600cc's of twin scroll fun :)
Posts: 25,565
Likes: 0
Received 2 Likes
on
2 Posts
The yorkshire people use this place quite a bit http://www.sheffieldsubaruservice.co.uk/index.htm so probably worth getting your car booked in there for a check up
There is also a forum for west yorks on here
Tony
There is also a forum for west yorks on here
Tony
Thread
Thread Starter
Forum
Replies
Last Post