Diagnostics software for classic impreza
#1
Diagnostics software for classic impreza
Been looking around the net for some diagnostics software for classic
JDM - WRX V4 GC8E48D 280 4 door .(97-98?)
Any one help, been looking at ECUEXPLORER, which one to go for the classic and what tool to get and where to get if from.
JDM - WRX V4 GC8E48D 280 4 door .(97-98?)
Any one help, been looking at ECUEXPLORER, which one to go for the classic and what tool to get and where to get if from.
#3
I've just received my ser No for the Evoscran 2.7 sofeware you recommended and a EvoScan Subaru Select Monitor I (SSMI) 9pin/16pin DataLogger Cable (1990-1998). Ready to connect, just wondering if there is anything else, or other connector to make.
Some told me you need to connect some plugs at the bottom of the steering column.
Any advice before i start. Thanks
Some told me you need to connect some plugs at the bottom of the steering column.
Any advice before i start. Thanks
#4
The green/black plugs near the steering column are the 'manual' way of either resetting the ecu or reading error codes by means of the cel on the dash flashing in a sequence. So don't worry about them, just connect your cable to the obd2 connector near the coin tray, fire your laptop up and turn the ignition on.
Kevin
Kevin
Trending Topics
#8
Will not "Initialize Vehicle ECU" numerous trys what am i doing wrong, went through edit data logging setting made sure subaru 1990-1998 and SSMII was selected, a little stumped
Any one use the software
Any one use the software
#9
Spent some time with setting and finally got it working, great dashboard look and data logging.
Great support for Evoscan help desk, quick response from Hamish Ahern Administrater
Great bit of kit
Great support for Evoscan help desk, quick response from Hamish Ahern Administrater
Great bit of kit
Thread
Thread Starter
Forum
Replies
Last Post
stonejedi
Wheels And Tyres For Sale
7
21 September 2015 08:54 PM
KOEScoob
ScoobyNet General
6
17 September 2015 03:51 PM