tubbytommy

iTrader: (20)

im going to get my blob sti remapped soon it has miltek cat back non resonated exhaust and green panel filter and has ppp fitted
anyone got any idea what bhp i should expect?

TonyBurns

iTrader: (3)

Well the ppp wont make any difference as it will be mapped over (so your car wont be a PPP'd car anymore).
The plus side is that you have the sports cat, now is the exhaust a 2.5 inch or 3 inch? but guestimates are around 340-350bhp.

Tony

KAS35RSTI

iTrader: (73)

I would say 340ish

BBB3

iTrader: (7)

330 bhp at a guess

tubbytommy

iTrader: (20)

i think its 2.75 inch any suggestions on any other mods i should do before the remap?

KAS35RSTI

iTrader: (73)

I would say 340ish

The Grift

3 port boost solanoid

Check your fuel pump is actually a proper upgraded one, should be a walbro if it really has had a PPP. Also check how old it is. Mine was mapped in 2009 having had one fitted in 2004 and wasn't up to the job. Had to swap for a new one mid mapping session.

Ported headers with matched pipe, (Harvey Smith)

I'd look at handling mods after this.

Stick to this as the next level is gonna cost you.

You are gonna be looking at anywhere between 320 - 340 bhp depending which rollers you are on, I wouldn't get hung up on the bhp figure.

TingTongPJ

iTrader: (24)

my sti ppp 03 has had a remap

it's completely standard apart from a turbo change 18g and made a easy 340bhp/340flb

mapped by jgm

The Grift

forgot to mention upgraded set of sparkplugs, i blew a set of NGK pfr6b's so went for 7b's

TurboAndy

iTrader: (1)

Defo check your fuel pump and I would change your spark plugs for NGK pfr7b's

As Grift says realy Tommy.