doggydowg

Hiya guys

I have a subaru uk 2000 my 97 the rear wheel is bent in slightly suspect it will need new anti roll barr and or rear wishbone are they the same on the uk 2000 and wrx Im assuming sti is probably different is the wrx and uk 2000 the same thoe?

Thanks in advance

dabow

iTrader: (19)

they have lateral links & a trailer arm.
im also sure the sti has the same.

to be honisti, d check the shock its self mate
that plays a big part in every thing running right

doggydowg

Its been crashd up a kirb sideways going about 40 thw wheel looks bent in and points slightly towards the other at the bottom.

dabow

iTrader: (19)

if you bumped it mate. may be a case, of taking the rear shock/trailer arm/lataral links along with the hub, to see what damage there is. the other thing, the shaft could even be damaged. once off, you should be able to see whats bent or not.

not the hardest of jobs to doyou may loose a little diff oil.

doggydowg

I havnt got a clue about any of this stuff going to take it to garage 2m and get it on ramps and have them have a look wouldnt know where to beging lol.

doggydowg

Ive just had my car up on the ramps the rear wheel bends in at the bottom and also looks as if the front of the wheel sits further in then the back.

I got tracking checked and it reads as follows at the rear

toe left 2.8
toe right 12.4

camber left -1.06
camber right 0.36

under neethe we cant spot anything that looks bent, where do I start to replace things?

thanks