WRX engine into a UK turbo
#1
Guest
Posts: n/a
WRX engine into a UK turbo
Hello All
Just preparing myself for the worst
I have a R reg 1998 UK turbo 2000
Was wondering what would be needed to put a WRX engine into it as im not finding many UK engines
Do i just need engine (new clutch of course) and the ECU or how does that work
Thanks
Just preparing myself for the worst
I have a R reg 1998 UK turbo 2000
Was wondering what would be needed to put a WRX engine into it as im not finding many UK engines
Do i just need engine (new clutch of course) and the ECU or how does that work
Thanks
#2
Scooby Regular
iTrader: (1)
Join Date: Aug 2005
Location: Manchester ish
Posts: 18,547
Likes: 0
Received 0 Likes
on
0 Posts
if you get a replacement engine from the same year of car then it is a straight swap, the only difference maybe aircon. If you out an earlier engine in (say a 1992 wrx) then there are somethings that need to be swapped. Hopefully though its not your engine as per your other post
#4
Scooby Regular
iTrader: (1)
Join Date: Aug 2005
Location: Manchester ish
Posts: 18,547
Likes: 0
Received 0 Likes
on
0 Posts
the earlier engines have individual coil packs, whereas yours I think will have a central coil pack and leads, cant remember everything but if you post in technical you will get the answers there
#6
Your safest option is to just use the bare engine from the wrx, use your existing manifolds/ turbo etc.
Idealy get a phase 1.5 engine, but if need be a phase 1 will be fine, just be aware there may be more to swap over.
Your existing inlet manifold wont fit onto a phase 2 engine.
Idealy get a phase 1.5 engine, but if need be a phase 1 will be fine, just be aware there may be more to swap over.
Your existing inlet manifold wont fit onto a phase 2 engine.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM