YE5 1 SUB

iTrader: (2)

due they quote atw or atfw

Pete

I,m sure it,s Fly Bask...

YE5 1 SUB

iTrader: (2)

cheers pete.

Pete

Missing the Saff fella, or has the Subaru banished the memories??

Always loved seeing the saff on track mate, the flames

YE5 1 SUB

iTrader: (2)

first time out on track on the 13th april (easter mon)at donnie
see wot its like mate
down on power compared to the saff but also down on weight(till i get in .lol)
dont think it,ll break away as easy as the saff either ,will be strange in 4wd
remember combe at quarry

Pete

They,re a great car mate the RA, get yourself a genuine 330/350 bhp and there,s not much that,ll touch you to 120-130, then it dies after that cus of the box ratios... but, they,re not build for top speed, they,re sprint car like really...

But, saying that, there,s only the pit straight etc where you need your top speed to be fair, what speed did you used to pull in the saff down Donno pit straight Basky??

YE5 1 SUB

iTrader: (2)

its had a scobbyclinic remap and 255 pump ,fmic,new coilpacks plugs etc.runs 1.1 bar.
think the saff did about 130 ish.
dont think the scoob will flame like the saff,will give it the beans thou.


remember this

wrx9181

iTrader: (2)

Very nice cossi mate hope the scooby lives up to it

bigarf

iTrader: (67)

iirc scoobyclinics rollers give you at flywheel and at wheels readout.

GC8

They measure the power at the wheels and then guesstimate the flywheel figure.

YE5 1 SUB

iTrader: (2)

the print out shows 276
and with peolple saying 1.2bar is giving them around 320ish
was just woundering if it was wheels or flywheel reading?

Tidgy

276 wheels 320 fly wheel

Pete

Surely 276 whp is more than 320 fly Tidgy??

YE5 1 SUB

iTrader: (2)

would 1.1 bar do that much power (320)

Tidgy

he did say ish lol mines 266 and 340 so yeah its prob a bit out, figures from exactly the same rollers so not sure whats happenign with that, whast the exact figures?

p.s. i didn't check the figures thgemselves lol

Tidgy

depends on turbo and spec

YE5 1 SUB

iTrader: (2)

std internals and a tdo5..

Tidgy

you sure its 1.1 bar?

stevebt

iTrader: (8)

A td05 won't make 320bhp at 1.1bar.

Tidgy

id guess the standard 1.3ish

YE5 1 SUB

iTrader: (2)

deffo 1.1 bar,as for turbo i,m assuming its a std one
where do i check

Tidgy

wont matter what turbo it is as such, if its been mapped the boost will have been raised so wont be 1.1, will prb be nearer 1.3 peak then drop off a bit