B4 getting a Apexi power fc fitted.....?
02 July 2008, 04:55 PM
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Oct 2006
Location: Hertfordshire
Posts: 1,083
Likes: 0
Received 0 Likes
on
0 Posts
B4 getting a Apexi power fc fitted.....?
As above what modifications could i benifit from prior 2 having an apexi fitted?
i.e FMIC fuel pressure regulator etc.......
My car is a MY97 Type R already has air filter and exust (with cats)
Thanks in advance for and advice or ur own experiances
Knighty99
i.e FMIC fuel pressure regulator etc.......
My car is a MY97 Type R already has air filter and exust (with cats)
Thanks in advance for and advice or ur own experiances
Knighty99
02 July 2008, 07:49 PM
#3
Former Sponsor
iTrader: (3)
Join Date: Jan 2007
Location: London
Posts: 1,584
Likes: 0
Received 0 Likes
on
0 Posts
..
Walbro fuel Pump, Straight through Aftermarket Exhuast system including decatted Downpipe, Uprated panel filter/induction kit, NGK PFR7B plugs, these are the bare minimum mods that should be done before a remap!
03 July 2008, 11:29 AM
#7
Also consider getting an AVC-R,
it works brilliantly with the Power FC, and allows higher accuracy of boost control in comparison to the Apexi, it also has it's own 3 port boost solenoid so will be able to hold boost better in comparison to the standard 2 port solenoid you have....
it works brilliantly with the Power FC, and allows higher accuracy of boost control in comparison to the Apexi, it also has it's own 3 port boost solenoid so will be able to hold boost better in comparison to the standard 2 port solenoid you have....
Trending Topics
03 July 2008, 12:36 PM
#8
Scooby Regular
iTrader: (2)
Join Date: May 2000
Location: Class record holder at Pembrey Llandow Goodwood MIRA Hethel Blyton Curborough Lydden and Snetterton
Posts: 8,626
Likes: 0
Received 0 Likes
on
0 Posts
Depends on how much you have to spend really, since most mods need an adjustment to the map, hence get all mods on beforehand to save cash in the long run.
Fuel pump definately, new plugs and to be honest a good full service is always a good idea. 3 port solonoid perhaps? Best ask your mapper.
After that its what you want to spend.
Decat
headers (ported ot tubular depending on power goals)
Fuel pump definately, new plugs and to be honest a good full service is always a good idea. 3 port solonoid perhaps? Best ask your mapper.
After that its what you want to spend.
Decat
headers (ported ot tubular depending on power goals)
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM