td04h
#3
Scooby Regular
iTrader: (1)
Join Date: Aug 2006
Location: Newcastle
Posts: 621
Likes: 0
Received 0 Likes
on
0 Posts
Hi mate
made a huge difference
running 313/302 with panel filter,full 3"decat and tek3 map by Andy F on my my99
Can't recomend it enough.
You get to keep the low spool but a much more balanced curve up to about 6500 whereas the tdo4 runs out of steam way before that
in the real world with the rest of my handling mods makes for a really good fast road car.
cheers
matt
made a huge difference
running 313/302 with panel filter,full 3"decat and tek3 map by Andy F on my my99
Can't recomend it enough.
You get to keep the low spool but a much more balanced curve up to about 6500 whereas the tdo4 runs out of steam way before that
in the real world with the rest of my handling mods makes for a really good fast road car.
cheers
matt
#4
Scooby Regular
Join Date: Jun 2006
Location: Edinburgh (ish)
Posts: 8,089
Likes: 0
Received 0 Likes
on
0 Posts
I seem to remember there was a thread about it a while ago ?
Ah, here it is !
https://www.scoobynet.com/scoobynet-...ml#post7041437
Ah, here it is !
https://www.scoobynet.com/scoobynet-...ml#post7041437
#5
Scooby Regular
To give you an idea my mods are;
STI Intercooler now with standard dump valve
STI Scoop and splitter
Green Cotton Panel Filter
H & S Up Pipe
Magnex Unequal Headers
TSL Thundercat Downpipe
TSL Resonated Centre Section
STI Genome Back Box
Walbro Fuel Pump
FSE Fuel Regulator
STI pink injectors
Prodrive 3 port boost solenoid
TD04 Hybrid Turbo (Andy F)
Remap (Andy F)
Boost set for 1.4 Bar midrange, tailing off to 1.2 Bar.
It made 314 bhp & 328 lb/ft.
The same mods with a standard TD04, you would be lucky to get more than 280bhp & 280 lb/ft.
STI Intercooler now with standard dump valve
STI Scoop and splitter
Green Cotton Panel Filter
H & S Up Pipe
Magnex Unequal Headers
TSL Thundercat Downpipe
TSL Resonated Centre Section
STI Genome Back Box
Walbro Fuel Pump
FSE Fuel Regulator
STI pink injectors
Prodrive 3 port boost solenoid
TD04 Hybrid Turbo (Andy F)
Remap (Andy F)
Boost set for 1.4 Bar midrange, tailing off to 1.2 Bar.
It made 314 bhp & 328 lb/ft.
The same mods with a standard TD04, you would be lucky to get more than 280bhp & 280 lb/ft.
Thread
Thread Starter
Forum
Replies
Last Post
burt2000
Subaru Parts
6
04 August 2014 07:58 PM