Mikkel

Is this just stuck on or is it also drilled/bolted on?

I think it looks a bit odd on the back of my car now I have removed all the after market STI badging... prefer the SUBARU lettering from the pre 05 cars to be honest.

<--- view

I'm going to remove it if it is just stuck on.

Drift_King

iTrader: (1)

If you get it off (it will only be glued on) then I'll take it off your hands Thinking of losing the SUBARU letters and replacing with the logo you have.

a_fisher

I know the lettering used to be stuck... guess it is the same.

Look in the boot lid, you'll see if it comes through

AndyMoody

iTrader: (2)

I think I read on a US site that it is stuck on but if you remove it there is a hole underneath it. So I'd be very careful about removing it. Check if you can on the boot inside.

Andy.

Black-Hawk

iTrader: (4)

if you look inside your boot lid youll see that youll be left with holes.

Mikkel

Aye think it will from what I can see... leaving it on.

WezGT555

I took off the "WRX" and "STi" badges from my MY05 with no problems. I used a heat gun, a card for applying fillers and lots of patience.

Mikkel

I've already done the STI and WRX badges as my car is a spec D and is not meant to have any badging like that.

They came off really easily with a bit of hot water, a credit card and AG tar remover. Took about 20 mins.

jasonius

iTrader: (1)

Is there anyway of changing the horrid UK lock to the far nicer JDM version, without swapping the boot..?

Why do UK cars have a different lock/keyhole to the JDM versions..?

Elmer Fudpucker

it will leave you with two holes so I painted mine



...and everybody hates it