andy_s37

I'm after a spoilerless/hole-less boot lid for my classic but can't find one. Has anyone got any ideas where to find one please?

Alternatively i will remove the spoiler (STI6) from my existing one, weld up the holes and get it sprayed. How much am i looking at for this would you say?

TIA
Andy.

funkyspider

If the boot off a non-turbo impreza is a straight swap fit then that's ur best bet.

Isn't there a sport forum somewhere ? ...

aggs

API may be able to help

Mo.k

iTrader: (5)

carbon fiber ones come without holes i think and do you want to sell me your sti6 spoiler ? to get your boot sorted would be around £150-200 mark.

SteveScooby

iTrader: (2)

Sports still have spoilers so there will be holes

Brun

.........in which case, an Impreza GX is the best bet

gljam

In which case it won't fit

Brun

Why?

gljam

GX is the bugeye onwards shape

best bet would be to go for a 1.6 or 1.8 GL bootlid, I think the 2.0GL's and as stated definately the sports all came fitted with spoilers.

Brun

GX/GL........whatever

gljam

averyp2

iTrader: (25)

even most 1.6s came with spoilers, good luck searching!

Jolly Green Monster

iTrader: (4)

Andy does fibreglass boots I cannot remember his company website (doh)

but his email is

SUPERCARSBABY@hotmail.com

Simon

andy_s37

Cheers for the replies fella's I'm going to go to a body shop when i get chance and price it. As for selling the spoiler I will PM you when I'm sorted.

Andy.

D6ale

iTrader: (1)

my '93 1.6 came with a spoiler. but there were some without. try Grade A

The rookie

iTrader: (1)

Try your local autotrader, look for a breakers with an impreza and pray its an L or GL with no spoiler, they certainly do exist if few and far between.

Simon

andy_s37

I tried Grade A last time i was there and he did that sucking air in through the teeth thing that builders do. As it says above, rocking-horse****.

Andy.

andy_s37

BTTT for an old thread. I'm still looking for one as the body shop said "i'll do it but i don't really want to" (refering to welding holes up). Yeah, cheers mate fills me full of confidence.

1. Anybody got an elusive no-holes boot lid?
2. Do the stealers sell 'em with no holes?
3. How much should i expect to sell an STI6 (reproduction) spoiler for

Ta
Andy.

92typeRA

get a spare bootlid (£25) and try it yourself
fiberglass and filler .....

my mate (who paints) told me to give it a go. just take my time iff i made an *** hes said he would fix.


[img=http://img255.imageshack.us/img255/6278/picture296lf5.th.jpg]

[img=http://img255.imageshack.us/img255/3614/picture217pm8.th.jpg]

[img=http://img407.imageshack.us/img407/5154/picture297xa5.th.jpg]

[img=http://img255.imageshack.us/img255/3897/picture298cj3.th.jpg]

[img=http://img407.imageshack.us/img407/5791/picture300cu7.th.jpg]

trying to get it flat was a nightmare but got there in the end .just needs to get it painted now

Neil..

iTrader: (35)

Fibreglass and filler is no way to do the job....
Over time it will shrink back and the holes will show up...

We have welded a few up, and it is quite tricky to do without distorting the boot lid.
If the boot lid has holes accross the centre (ie, for an STi 6 style spoiler) forget it.
You need to start off with one which has holes ONLY near the sides...

To get the job done properly, be looking to pay around £250-£300...

The rookie

iTrader: (1)

I filled holes in my Sierra when I changed the rear spoiler, pinged them in with a hammer, glassed over the back and a decent flxible filler on the front, 4 years later I have no cracks.

Did you try your local breakers through the AT, I have a recent Midlands one I can look in if you want me to, or I can do the job for you - and charge you for the pleasure! Where are you Andy as your location isn't too helpful!

Simon

andy_s37

Rookie i'm by Liverpool. I'm still a bit undecided at the mo but i think i might take the spoiler off and sell it and just duct tape the holes until i have the money (from the spoiler) then put it in the body shop.

Andy.

bibo_boy

Little black rubber grommets .... do the job