lisa300

Hi, has anyone changed there standard double din head unit in 2003 onwards Imprezas,I want to change mine but cant seem to find anywhere that has them this size.Any pics of your replacement head units or sites to go and look at them would be great

MattW

Get a single din unit and a pocket to fill the hole. Pocket can be bought from Subaru dealer, do a search on her for Din pocket for the part numbers (there are two, one from the forester with a neat flap/cover and an open one).

STi_Bandit

I put a Kenwood DDX-6029 in my 2004 STi and the finish colour of the kenwood was the same colour as the trim so it has a real factory looking finish to it. I also filed the mounting brackets out by 10mm or so as to allow the face of the unit to fit flush with the dash. Everyone that has seen it so far has really liked it. here is some pics for you to look at

Bandit

shanea

Halfrauds do the thingys that take up the gap. About 15 squid if I remember. Did my 53 wrx and fitted a JVC Exad one

Snazy

A single DIN head unit and a SECS PSi3 does just the trick



No trickery or extra parts needed to fit them, just unscrew the cage sides from the factory din unit, and screw in the headunit

F1 CJE UK

iTrader: (8)

Kenwood DDX-6029 mate does look very good and it great when you are in a JAM (dam the m1, M25)

rb5 286

iTrader: (2)

there are plenty of headunits available

just look on the kenwood, alpine, pioneer websites and look for the double dine units

I have a Kenwood 6029 as above.

ru'

Check the FAQ sticky thread in the ICE section...