what defi bf gauge
#1
what defi bf gauge
Will best suit the green illumination of the wrx spedo etc
blue,white or is there another defi link gauge that will be better suited im after boost,oil temp,oil pres
any comments welcome thanks lee
blue,white or is there another defi link gauge that will be better suited im after boost,oil temp,oil pres
any comments welcome thanks lee
#2
Scooby Regular
Join Date: Sep 2006
Location: Barnsley
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
I have the Defi Link Meter Gauges, purchased from Scooby Clinic (oil pressure, oil temp and boost)in my Classic WRX, they illuminate green and match the dash board illumination.
If you find them too bright you can fit a resistor in the power lead. Also if you like to listen to the radio when parked up with the engine of,for whatever reason, fit a switch so you can turn them off or the alarm from the oil pressure can get a bit annoying.
If you find them too bright you can fit a resistor in the power lead. Also if you like to listen to the radio when parked up with the engine of,for whatever reason, fit a switch so you can turn them off or the alarm from the oil pressure can get a bit annoying.
#4
Scooby Regular
Join Date: Sep 2006
Location: Barnsley
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
It's an easy enough job to do your self, did mine my self, my cars a Jap import Classic and the only extra i had to buy was an adaptor for the oil pressure to enable the original Subaru sensor to be kept, Scooby Clinic supply them.Then used the old oil pressure plug to fit the temp sensor.
Did'nt use a sandwich plate, fitted oil temp above cylinder 3, which means the removal of the intercooler to fit, but its only 3 bolts.Try this link
Chiark: Scooby Gauges the cheap-ish way
Did'nt use a sandwich plate, fitted oil temp above cylinder 3, which means the removal of the intercooler to fit, but its only 3 bolts.Try this link
Chiark: Scooby Gauges the cheap-ish way
Thread
Thread Starter
Forum
Replies
Last Post