MY old scoob
25 July 2007, 07:00 PM
#3
Scooby Regular
iTrader: (7)
Join Date: Jun 2001
Location: Stalking Kate Beckinsale
Posts: 4,265
Likes: 0
Received 0 Likes
on
0 Posts
I was just going through my old PM's and clicked your name for the hell of it to see if you still lurk on here! I still have fluffy mate. Since you are knocking about do you know why the front drivers door and/or door panel were changed from the originals? I noticed this almost immediatly but wasn't really bothered. Not fussed, just curious and have been meaning to get the 'slightly' so different correct trim.
Any other little secrets that you know please feel free to tell me via PM. I have had her for 2 years now so not really fussed! She goes by C2 EVL now btw
.
Cheers,
Nick.
Any other little secrets that you know please feel free to tell me via PM. I have had her for 2 years now so not really fussed! She goes by C2 EVL now btw
.Cheers,
Nick.
26 July 2007, 12:52 PM
#4
Scooby Regular
Thread Starter
Join Date: Mar 2005
Location: down southish
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
good to hear she is still running well!!!!!!!!!!!!!!!!!!! the arm rests were changed doewn to the 1st owner had dermititus and the cream he used on his elbow had the leather ripple so dhcars recover them before i brought the car apart from that, thats it. can you post a picture so i can see how it looks now?? cheers stuart..............
26 July 2007, 01:13 PM
#5
Scooby Regular
iTrader: (7)
Join Date: Jun 2001
Location: Stalking Kate Beckinsale
Posts: 4,265
Likes: 0
Received 0 Likes
on
0 Posts
I haven't got any up to data pictures really as she is at the tuners atm but these should give you some idea. The only things missing really are the new wheels, cut to fit front plate and the rallyflapz:
and here: Index of /clanftp/nick/scoobs/fluffy/scoobynet
Yes I know she needs proper detailing
. I have never been in to that and didn't wash her for an entire year when we had the hosepipe ban 
.
Cheers,
Nick.
P.S. The current spec is on the left 'View My Scooby', as you can see, a lot has changed. Not known for leaving things standard .
and here: Index of /clanftp/nick/scoobs/fluffy/scoobynet
Yes I know she needs proper detailing
. I have never been in to that and didn't wash her for an entire year when we had the hosepipe ban .Cheers,
Nick.
P.S. The current spec is on the left 'View My Scooby', as you can see, a lot has changed
. Not known for leaving things standard .
26 July 2007, 03:08 PM
#7
Scooby Regular
iTrader: (7)
Join Date: Jun 2001
Location: Stalking Kate Beckinsale
Posts: 4,265
Likes: 0
Received 0 Likes
on
0 Posts
When I got her she was a lot 'softer' than my old scoobs if you catch my drift so I named her Fluffy 
. Now she isn't really 'soft' at all but she will always have that name .
. Now she isn't really 'soft' at all but she will always have that name .
Trending Topics
26 July 2007, 03:59 PM
#8
Detailing or not, that is a great looking motor! When you say cut to fit plate - what is the final size of it going to be? Always thought about nicking an inch or two from mine.
26 July 2007, 04:15 PM
#9
Scooby Regular
iTrader: (7)
Join Date: Jun 2001
Location: Stalking Kate Beckinsale
Posts: 4,265
Likes: 0
Received 0 Likes
on
0 Posts
I went by this from the DVLA: http://www.dvla.gov.uk/media/pdf/leaflets/v796.pdf "Top, bottom and side margins (minimum) 11 mm" and dremeled mine on the front plate only for now to fit far better with just the 5 characters, took 10 mins if that to do and round the edges off. Looks pimp, fully legal and lets more air in to the front as a bonus
Thread
Thread Starter
Forum
Replies
Last Post
14500rpm
Suspension
15
18 September 2015 09:15 AM
