The_Lecht_Rocks

in order to fit the performance creations flaps, is it necessary to remove the wheels if the car already has the brackets fitted with alternative (TRU) flaps ?



thanks guys,

simon.

B0DSKI

iTrader: (17)

It can be done without removing the rear wheels no problems, i had a lot more trouble with the fronts but with a stubby philips screwdriver it can be done, just be prepared to get a few scratches and scrapes on your forearms

1168

it can be done this way,but its awkward,might be an idea just to jack the car up to give you more clearence,must admit i took the wheels off to save faffing about

The_Lecht_Rocks

no problems, wheels coming off - regarding the existing (TRU) bracket, will the PC flaps screw straight in (fitment pattern being the same ?)

simon.

GazTheHat

I started on the back and left the wheel on, was fiddly. Did the rest by taking the wheel off. Much easier. Even drilled small pilot holes for the screws which made it quicker.

Think i put the bracket and the flap the wrong way round though

The_Lecht_Rocks

guys - are the screws that accompany the fl;aps self-tapping ?

thanks,

simon.