mikeb290bhp

by power tune in chester

and i need to reset my ECU but i want to no if it will effect the tune they have don if i do this

and also how do i rest the ECU

thanks mike

T5NYW

iTrader: (4)

Mike,

Will very much depend on the Model year and how it was "Tuned" Remap or by piggyback chip

IIRC
before MY99 there are some cables under the dash to join up but can''t normally be EcuTek'd

After MY99 just disconnect battery 10 mins (ECU is self calibrating) but then starts from afresh

IMHO

Tony

mikeb290bhp

my car is a 02 plate wrx

so could i just disconect the batt

GC8

'Tuned' is a meaningless euphamism.

T5NYW

iTrader: (4)

Yes, but why do you want to reset it?? Decatted and Engine check light by any chance?

Tony

crispyduck

iTrader: (1)

Agree with others, you will have to tell us what tune you have e.g. E**T*K.

If you have the equipment, I recommend before you do a reset to log any fault codes including your current IAM setting. All this you will lose when resetting, which gives you an indicitive health check.

If your determined to reset anyway, details below:

http://www.scoobypedia.co.uk/index.p...ledge/ECUReset

ECU fast learning trick here:

http://www.scoobypedia.co.uk/index.p...tLearningTrick

-Steve.

mikeb290bhp

thanks for the help im just going to put the car into dp motorsportand let them sort it out thanks anyway mike

Midlife......

iTrader: (2)

Mike

You can only reset the ECU via the OBD port under the steering wheel

Shaun

MY02 Bugeye

seanks

Disconnect the battery -ve connection, press the brake pedal for 30 secs.

re-attach battery connector, ECU reset.. 8D