HELP! fitting AVCR
03 June 2006, 08:15 PM
#1
Scooby Regular
Thread Starter
Join Date: Dec 2005
Location: York
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
HELP! fitting AVCR
Right guys, just fitted AVCR in MY97,
Come to take it up the road, the check light has come on and it seems to fuel cut around 4k.
Ive checked the wiring 5 times now and all seems ok so to me it must be a piping issue.
This is how ive connected it:
Removed original Boost pressure solenoid, fitted new one, connected 'NO' on new valve to the hot side of the turbo ( the little nipple on turbo outlet going to intercooler) connected 'COM' to the actuator.
Connected the new pressure sensor with 'T' between the pipe that goes between the manifold and the other original sensor next to where the original boost pressure solonoid was.
the only thing that seems to be amiss (to me) is it says on page 42 of the fitting instructions ' subaru vehicles require a WAY to connect the solenoid valve'
any ideas guys, its driving me mad!
cheers
Lee.
Come to take it up the road, the check light has come on and it seems to fuel cut around 4k.
Ive checked the wiring 5 times now and all seems ok so to me it must be a piping issue.
This is how ive connected it:
Removed original Boost pressure solenoid, fitted new one, connected 'NO' on new valve to the hot side of the turbo ( the little nipple on turbo outlet going to intercooler) connected 'COM' to the actuator.
Connected the new pressure sensor with 'T' between the pipe that goes between the manifold and the other original sensor next to where the original boost pressure solonoid was.
the only thing that seems to be amiss (to me) is it says on page 42 of the fitting instructions ' subaru vehicles require a WAY to connect the solenoid valve'
any ideas guys, its driving me mad!
cheers
Lee.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
JonMc
Subaru Parts
22
06 February 2016 09:50 PM