P1 alarm programing
20 October 2001, 11:09 PM
#1
Scooby Regular
Thread Starter
Join Date: Dec 1999
Location: Cheshire
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
Hi Guys
Anyone know how to program the P1 alarm so that it auto sets and locks doors after 30s, It does say it can be done in the book but tio get the main dealer to do it, just wondering if anyone knows on here how to do it?
save me having to take a trip to the dealership
Anyone know how to program the P1 alarm so that it auto sets and locks doors after 30s, It does say it can be done in the book but tio get the main dealer to do it, just wondering if anyone knows on here how to do it?
save me having to take a trip to the dealership
21 October 2001, 09:57 AM
#2
Scooby Regular
Join Date: Jan 2001
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
The sigma M30 fitted on my MY00 Turbo will reset itself after 30 seconds if you turn off the alarm but don't open any doors. This is just in case you press the button and it unlocks and you don't realise.
Si
Si
21 October 2001, 12:38 PM
#4
Scooby Regular
iTrader: (1)
Join Date: Dec 2000
Location: Herts.
Posts: 1,727
Likes: 0
Received 0 Likes
on
0 Posts
There are three different features:
-Auto re-arm, which works as described above. Only locks the doors if you've unlocked them but not got in for a pre-programmed time.
This is normally activated by Subaru before selling the car.
-Auto arm, which sets the alarm after a pre-programmed time from the ignition being turned off and the last door being closed.
-Auto arm with door locking, which is as auto arm but also locks the doors. This mode is a bit dangerous in that if you get out and leave your keys in the car they'll get locked in.
The user's manual says these features need to be programmed by a dealer but the e-mail copy of the programmers manual that is circulating lets you know what codes to enter to switch on/off these features.
-Auto re-arm, which works as described above. Only locks the doors if you've unlocked them but not got in for a pre-programmed time.
This is normally activated by Subaru before selling the car.
-Auto arm, which sets the alarm after a pre-programmed time from the ignition being turned off and the last door being closed.
-Auto arm with door locking, which is as auto arm but also locks the doors. This mode is a bit dangerous in that if you get out and leave your keys in the car they'll get locked in.
The user's manual says these features need to be programmed by a dealer but the e-mail copy of the programmers manual that is circulating lets you know what codes to enter to switch on/off these features.
21 October 2001, 01:18 PM
#5
Scooby Regular
Thread Starter
Join Date: Dec 1999
Location: Cheshire
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
Hi Guys
Thx for the replys
could someone please e-mail copy of the programmers manual that is circulating lets you know what codes to enter to switch on/off these features.
Then i can programme the settings for auto arm myself
Thx for the replys
could someone please e-mail copy of the programmers manual that is circulating lets you know what codes to enter to switch on/off these features.
Then i can programme the settings for auto arm myself
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
toyney83
General Technical
10
02 October 2015 08:38 PM